CarProg v5.46

[kappa1]

Hi to all CarProg v5.46 + lib files + work on CLONE devices
Link here: DepositFiles (http://dfiles.eu/files/mshbk0xbw?redirect)
Inside package are install instructions...
Tested & worked...
No need password free to all :top:
P.S. Dont forget thanks and/or reputation button!

[kardi78]

Hi, my clone carprog, not working on perfect eeprom reader. M35080, 95160 working,
24c.. NOT working.

Any idea for somebody?

[carradio2001]

It is still 4.01 version !

Carradio2001.

[ruffles1986]

Hi, my clone carprog, not working on perfect eeprom reader. M35080, 95160 working,
24c.. NOT working.

Any idea for somebody?
Have you made the modifycations posted in this forum?

[murat332]

Thank you my friend very nice work

[kardi78]

NO, I using 5.31 version, I had been repair can bus application, but i dont find eeprom error.

[lkjubaking]

Thank you my friend

[challalmed65]

THANK YOU MY FRIEND GOOD

[3abas27]

thanks for this usefull post
but what can this version 5.46 can do than 4.01 or 5.31
the problem is hardware freind my one not work on immo renault key progrmming any idea how to make is working?
THANKS

[gwee]

This will only work if your device having lib file 081105CAR001773I.

If not, it will brick your device.

[igorr]

here is it 6.13 with lib.

[einet]

For Clone also?

[gwee]

For Clone also?

NOT for clone.

[igorr]

For Clone also?
I use it with my clone 4.74

[gwee]

I use it with my clone 4.74

How's the soft, all functions activated.

If so, I will flash my carprog clone too.

[igorr]

There are some new dasbords.I allso refleshed mine from 4.01 to 4.74

[keygargoil]

Does Renault Megan's key programming work on this model


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[gwee]

Does Renault Megan's key programming work on this model


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

I bought the carprog for this purpose only, yet to try it myself.

[keygargoil]

I've a 4.1 and it works for all but the Megan and scenic so would be nice to get it working


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[super jumbe]

Need advice please, I have installed v05.46 all folders now showing n / a any idea? Or do I have to get connected to car to work?
Thanks for your time.

[einet]

I think sonthing is wrong with your CP!
Mavbe gone!!!!


I fount out that some CP clone are working good with new software, but some other is not working
Like YOURS before are working and after start some version ---- ALL n/a.

I dont find out the difrence on the BIN files from CP clone but it must have some difrence or is on the eeprom from the CP?

[igorr]

reflesh car prog with 4.74 dump and you can use 4.74 and 6.13 software onlly problem is that counter is come back and start at 50 units

[einet]

what you win NEW with 6.13?

[gwee]

Need advice please, I have installed v05.46 all folders now showing n / a any idea? Or do I have to get connected to car to work?
Thanks for your time.

No need to connect to car.

Some folder n/a, not all. You need to connect carprog.

[super jumbe]

reflesh car prog with 4.74 dump and you can use 4.74 and 6.13 software onlly problem is that counter is come back and start at 50 units

I had already flashed this 1 before with success, I am having a problem this time when I came to a stage when I removed chip and connected jtag I am not getting the target, any idea what am I doing wrong?? I have checked the video and I am doing exactly the same.

When I go for the target it says, Unable to find target, please make sure that the hardware is properly connected and powered up. For MCU with multiple JTAG controllers, please also ensure that the TAP configuration has been set accordingly.

Any help greatly appreciated mate.

[u.s]

here is it 6.13 with lib.

thank you, i have 4.74 with dongle with the s/n 201213CAR000ME61.
can i use this 6.13 and lib file with it as is or do i need to flash any chips on the carprog hardware before i use the 6.13 software?

also, is this 6.13 lib file the same as the 4.01 lib file

[daquima]

Good work, thank you very very much

[gwee]

thank you, i have 4.74 with dongle with the s/n 201213CAR000ME61.
can i use this 6.13 and lib file with it as is or do i need to flash any chips on the carprog hardware before i use the 6.13 software?

also, is this 6.13 lib file the same as the 4.01 lib file

Your lib file is same as 6.13 but different from 4.01

[u.s]

Thanks. What I meant to ask was does the 6.13 lib file have the same authorisations as the 4.01 lib file

[einet]

I had already flashed this 1 before with success, I am having a problem this time when I came to a stage when I removed chip and connected jtag I am not getting the target, any idea what am I doing wrong?? I have checked the video and I am doing exactly the same.

When I go for the target it says, Unable to find target, please make sure that the hardware is properly connected and powered up. For MCU with multiple JTAG controllers, please also ensure that the TAP configuration has been set accordingly.

Any help greatly appreciated mate.

I have on the beginning the same problem!

Cut your Jtag cable what came with the CP then let it over 5cm, the this must work.
when not play with LPT bios config.

tray

[forscheezee]

Thanks. What I meant to ask was does the 6.13 lib file have the same authorisations as the 4.01 lib file

It has 4.74 authorizations.

[super jumbe]

I have on the beginning the same problem!

Cut your Jtag cable what came with the CP then let it over 5cm, the this must work.
when not play with LPT bios config.

tray

Thanks mate got it sorted, it was the LPT not configured correctly, almost every module working and no more N/A.
This afternoon I am doing dash on note chip 93c76 fingers crossed.