PDA

View Full Version : VW Transporter T5-error



fanvw
27th November, 2013, 09:44 AM
The car works perfectly,but check engine is on and VCDS finds "16986 P0602 - control module programming error"
Is there something wrong in the mod file?
Here are both files attached:232046

tomtom0785
27th November, 2013, 11:20 AM
what did you use to reprogram??

Babos
27th November, 2013, 11:36 AM
Try write back original file and after check summa corect and write mod file again.

fanvw
27th November, 2013, 11:45 AM
I use MPPS (metalic version)...checksum made by WinOls and seems to be OK,even MPPS sw tell's me that cks is OK...

kazikk
27th November, 2013, 12:58 PM
Turn off CRC in Winols and write file, MPPS should correct CRC.

fanvw
27th November, 2013, 01:04 PM
So the error comes from wrong checksum?Is there anothere software to check and correct checksum?
kazikk,i should redo the file from the original version and to not do the checksum?

mario38
27th November, 2013, 02:58 PM
The car works perfectly,but check engine is on and VCDS finds "16986 P0602 - control module programming error"
Is there something wrong in the mod file?
Here are both files attached:232046
your edit is not good contains many errors and negative values, and is not complete .. I suggest you do all the work from scratch

boomeer
27th November, 2013, 03:08 PM
I have that error to times on t5 2.5tdi , mod file ok, delete that error and all be fine. P.S read write and checksum by bdm

Отправлено с моего GT-I9300 при помощи Tapatalk

fanvw
27th November, 2013, 08:43 PM
This is the remaked file and a jpeg with the maps that i've modiffied...no checksum done,i refused winols when i was asked.So you say to let MPPS to correct the checksum,i'll try that to...
I cannot do a BDM read/write because the car is in a town on the opposed side of my country

easytech
28th November, 2013, 12:05 AM
Both mods won't work correctly. Alltough it has nothing to do with the checksum error.
Only 1 program may do this so let MPPS correct it.
First you must flash ori back then erase DTC. Key off for 5 minutes then flash the mod.

icezero2010
28th November, 2013, 02:37 AM
look at adress 05756 make it original but your file is really bad :-)

You can test my file ;-)

AlexandruP
28th November, 2013, 11:15 PM
I have this seen this many times, your file is bad.

robytza
29th November, 2013, 11:36 AM
I need a full dump (including eeprom) from a T5 with 3.2 gasoline engine.
Can you someone please help me ? thanks

pablo1971
29th November, 2013, 08:22 PM
why turn off checksum correction in winols...i dont understand.if anything,i would correct with winols....job done.

easytech
30th November, 2013, 11:53 PM
Winols is Ok but then you have to turn off correction in MPPS, i don't know if this is possible i don't have MPPS.