2012 Ford Escape CJ5T-14B321-AF eeprom 95640

[den5]

hi! Can someone help clear the crash data srs unit CJ5T-14B321-AF Ford Escape 2012.thanks

[Plcautoparts]

try this pass in PM and report

[den5]

try this pass in PM and report
this dump doesn't work. the error of b1193 is present. thanks
can eat still any attempts?

[Plcautoparts]

same password. try and report,

[den5]

same password. try and report,

doesn't work

[Plcautoparts]

Did you get any codes?


if I was of any help, dont forget to press the Thanks button.

[den5]

at me 15 mistakes are registered in the srs block. and all of them aren't erased

[Plcautoparts]

I have one last file out of another module, if this doesn't work I will give up.
same pass

[sagis]

Please help me need pass for this file FORD ESCAPE 13 CJ5T 14B321 AF Clear.zip (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=232662&d=1385822355)

[auto80]

Please help me need pass for this file FORD ESCAPE 13 CJ5T 14B321 AF Clear.zip (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=232662&d=1385822355)

post your file m8 for someone help you

Cheers

[sagis]

hi,please help me need clear crach
or send another clear dump

0 285 012 641 Bosch CJ5T-14B321-AH
eeprom 95640
thanks

[MOHCIN2]

HERE CLEAR TRY AND REPORT

[sagis]

Very Big Thank , tomorrow will be report!

[sagis]

After Crash eeprom I recording CLEAR eeprom, but diagnostic found two Unknown fault code, 80A0 and 93DA I can not delete it. Maibe someone know where problems?

Big Thank!

[repairmymodule]

The first code, B80A0 means you have a code in the Occupant control module that needs cleared. As for the second code, I have never seen it

[sagis]

Where location this Occupant control module,and how it cleared?

Thank

[repairmymodule]

You need a scan tool that can access the module, like Launch x431, Autel Maxidas, Snapon, etc

[sagis]

Yesterday I used AUTOCOM and Ford IDS diagnosis, but did not helped. I solved all SRS problems only with Launch X431

Many Thanks to all guys for helping me!
Good luck everyone!

[dmitriy0651]

Добрый день, у меня тоже проблемы с блоком CJ5T 14B321AH , висит ошибка crash data, помогите очистить
CJ5T 14B321AH, помогите очистить дамп от данных сбоя

[Sabi]

I CANNOT DOWNLOD YOU FILE send me pm i will clear it for you


Добрый день, у меня тоже проблемы с блоком CJ5T 14B321AH , висит ошибка crash data, помогите очистить
CJ5T 14B321AH, помогите очистить дамп от данных сбоя

[dmitriy0651]

к сожалению я не могу прикрепить файл в сообщении

[fokus4]

hi! Can someone help clear the crash data srs unit CJ5T-14B321-AF Ford Escape 2012.thanks

Here is your cleared file 100% working solution.
you will need to clear the codes from SRS and OPDS with your scanner

pass in PM