upa and nec adater problem

[digimile]

hi
need help to connect upa nec adater with device of upd780828A...i connect all cables accordit to upa manual but it show me error of baudrate capture error...how to solve this...????
thanks

[simensi]

hy i cant believe but i have the same problem i buy my a new nec conector and nothing the same problem?
i solder the pins up and nothing a solder the chip out of the bord on the bord that came with upa nec adapter....?
try to download manual for nec programer...thats my next step

[verica]

witch dash or bsi you try to read give more info

[simensi]

i try nec bsi xsara picasso 2001

[digimile]

hi
i try terrican...if some one make good pdf with working connections please share...thanks

[newgeniehex]

hello
bsi picasso have inside processor nec
data saved processor NEC 780949 (100 pin)NEC JAPAN (75076303)
no upd780828A
be carefull if you use clone adpater Nec it don't work !!

[digimile]

hi i have original upa and adapter also...but i have baudrate capture error...in the connection section all green....but reading error....thanks

[simensi]

i now that bsi have u780949 DIGIMILE has tryd hyundai terracan with u780828a but we have the same problem

[carbyvw]

for bsi xara try this connection.work 100%, remove resistor (pin9)

[simensi]

i will try and report thanks...

[Zaveruha]

I am also no luck with renault symbol.

[cheester]

for bsi xara try this connection.work 100%, remove resistor (pin9)

Upa NEC adapter clone working good or better not waist the time?

[baze007]

Upa NEC adapter clone working good or better not waist the time?



i confirm....clone work perfect

[autocargo]

Mine is working good (clone) , been using it for couple of Peugeot 307 nec dash corrections...

[cheester]

Thanks BAZE007 and autocargo for confirmation, did you try exactly same schema like carbyvw posted?

[auto4]

for bsi xara try this connection.work 100%, remove resistor (pin9)

Please, and what type of processor choose in UPA? 780949? because 75076275 it isn?t.

Thanks

[auto4]

Please, and what type of processor choose in UPA? 780949? because 75076275 it isn?t.

Thanks

I answer myself. I must choose 780949.

[mcgywer]

here's tested solution for uPD780949 using UPA clone.

Regards
Mat

[ELAB014]

Hi mates,
I have clone UPA with NEC adapter, green board
I tried the carbyvw schema but keeps me giving baudrate capture error
Any ideas to solve this????

THX

[jokas]

check the connection of the adapter to the programmer UPA (with multimeter)
works very

[ELAB014]

Hi jokas thx for your help

Finally my nec adapter was faulty, I posted a brico with instructions to repair

Cheers

[alclot]

here's tested solution for uPD780949 using UPA clone.

Regards
Mat

Hi everybody! I try to do with this steps with upa but give me error in pin 9 connection. Vpp gives 0,02V bad in red. I take off resistor and lift pin 10. NEC 75076275. Citroen Xsara Picasso
Can anybody help me?
Thanks in advance ;)

[cosmind]

try this. is tested with upa china clone

[Maximiliano]

good afternoon friends I do spend the same problem with reading nee for upa adapter and finally I realized the problem must remove the bridge carrying the NEC adapter having continuity with the pin 9 of the GROUNDED I hope they serve my commentary


regards:::.......