View Full Version : psg16 read
arvedo
4th December, 2013, 01:12 PM
Hi friends good morning, how I can read this pump flash.
tech2 have in my hands, candi.
but no steps.
once read here that could be done but can not find.
can help please
is for egr-off.
thank you very much for your help
tonih
4th December, 2013, 04:09 PM
You can read wit X17 by Obd , read,write and chk
arvedo
4th December, 2013, 06:03 PM
as a friend you can explain a little more detailed
LaraVAG
4th December, 2013, 06:04 PM
if you want use tech2 you must have TIS, and download from global server 32mb file. Now only x17 can raed, but only from pump, no OBD2! next update OBD2 read will be works
arvedo
4th December, 2013, 06:54 PM
tis2000 I can not send download link
darius89
4th December, 2013, 07:14 PM
Whats a tool X17 ????
tonih
4th December, 2013, 07:15 PM
Magpro X17
darius89
4th December, 2013, 07:34 PM
Thanks for answer.
magprog...What version???
does china magprog 4.2 version works ?
bavlas
4th December, 2013, 08:22 PM
what sollutyion can DTC off on PSG16?
i can flashing with opel scaner flasher
LaraVAG
4th December, 2013, 08:36 PM
no problem with dtc off,
About Magpro x17, only oryginal, newest version 8.3
darius89
4th December, 2013, 09:23 PM
one more question...Does possible to make egr off with disconnected egr ???
arvedo
4th December, 2013, 10:24 PM
friend if that's possible if more complicated is how to dump PSG16 undamaged. :)
but I'm doing it with tis2000.
I need less
darius89
5th December, 2013, 07:47 AM
with tech2 you will never damadge you psg16.
mario38
5th December, 2013, 08:45 AM
I think the best equipment to make reading and writing to both PSG16 tech2.
Now you can do well without egr off errors in memory .. hello
LaraVAG
5th December, 2013, 09:23 AM
Tech2 can't read software from pump, onlt X17 can do it now!
About PSG16 EGR OFF, yes, it posible to remove EGR out off car, and everything work. No DTC, no Limp mode, engine runs good.
tonih
5th December, 2013, 09:34 AM
Tech2 can't read software from pump, onlt X17 can do it now!
About PSG16 EGR OFF, yes, it posible to remove EGR out off car, and everything work. No DTC, no Limp mode, engine runs good. Yes confirm
darius89
6th December, 2013, 07:22 PM
CANT FIND OFICIAL magprog page.
LaraVAG
6th December, 2013, 07:25 PM
Shop Online (http://magicmotorsport.com/shop/)
vanya86
1st March, 2014, 07:08 PM
Check MAGPro Vehicle support. It doesnt support reading of PSG16 (edc16 prototype) with MPC555 inside.
That PUMP with ECU on top doesnt have Firmaware support for reading FLASH!!! Only BDM reading.
http://www.youtube.com/watch?v=AmM2H6cEOUc
PSG16 BDM Reading (http://autodijagnostika.biz/en/reparacije/opel-hr/motorsteuergeraet-hr-2-3/bosch-psg16-repair-reading-cloning/psg16-repair-clone-egroff-pin-read.html)
End of story
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.