View Full Version : Nissan Consult Ash counter
J_amb_o
4th December, 2013, 09:17 PM
New DPF fitted to Nissan Quahqai 1.5Dci.
DTC for Ash counter will not clear. I have onsult, i found "reset DPF data" but DTC will still not clear.
Any ideas?
J
J_amb_o
4th December, 2013, 09:42 PM
DTC is p242f
obd.tech
8th May, 2014, 08:13 PM
Did you fix this?
I have P1435 on a 2l dci 2007. Unable to clear dtc with autocom?
Any ideas?
mexanico1971
8th May, 2014, 09:03 PM
autocom does not erase fault code on 2l !
I have succeed erase it width texa !
J_amb_o
8th May, 2014, 09:03 PM
you will need to regen
obd.tech
9th May, 2014, 11:30 PM
DTC is p242f
you will need to regen
autocom does not erase fault code on 2l !
I have succeed erase it width texa !
Cheers guys
P242F is dpf overloaded, dpf is cleaned and 3 x regen with the autocom, but still can't clear the MIL P1435 current. Will the consult 3 clear this via regen and dpf data clear?
Nissan esm says the Dpf differential pressure should be less than 3mbar @2000rpm(seems to low?), mine is 15mbar?
Any advice to buy the consult clone with or without bluetooth? :beer:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.