PDA

View Full Version : Crafter DPF off, 0281014133


auto4
10th December, 2013, 07:20 PM
Hello mates.

I have here a VW Crafter 2008 with ecu bosch 0281014133 (074906032AT), Soft 1037503936. It?s an EDC16CP34-4.4. I need DPF off in this van because ecu is in limp mode by DPF. I read ecu with BDM100. I attached dumps. I have seen many post where the solution is given, but many of them do not work and others have password. Could someone make DPF-off for me with work solution? I would be very grateful.

Thank you

234339


http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Fil
kevfield
10th December, 2013, 09:53 PM
Seems to be something wrong with your file read again...

Thanks kev
auto4
10th December, 2013, 09:59 PM
OK, these are the flash file readed with BDM.

234378
AlexandruP
10th December, 2013, 10:46 PM
DPF is OFF! See file attached
auto4
10th December, 2013, 10:51 PM
Could I do dpf-off in this way? If so, could someone calculate the checksum in this file?
I do not know how to do with bdm (before or after write the flash?).

Thank you.

234384
auto4
10th December, 2013, 10:59 PM
DPF is OFF! See file attached

Thanks. Is it a tested solution? and Is checksum calculated?
AlexandruP
10th December, 2013, 11:01 PM
Yes of course its tested solution and checksum is calculated.
auto4
10th December, 2013, 11:05 PM
Yes of course its tested solution and checksum is calculated.


Thanks for your quick response, mate. I will try tomorrow and post here.

Regards.
auto4
11th December, 2013, 09:07 AM
I don?t understand why when i write the file with Bdm100 it changes the checksum. Any idea?
twincam
11th December, 2013, 11:08 AM
It's normal ,write this and all should be fine.
auto4
11th December, 2013, 05:35 PM
It's normal ,write this and all should be fine.

After saving the file, I pressed the button of the checksum in the BDM, should not have pressed?
I was unable to test whether it works or not. Tomorrow I will.
Thanks
twincam
11th December, 2013, 06:56 PM
Don't press anything, just write the file.
auto4
11th December, 2013, 07:03 PM
Don't press anything, just write the file.

Ok. Thanks
auto4
12th December, 2013, 10:12 PM
Yes of course its tested solution and checksum is calculated.


Hello. Today I tried the file and it works really fine. There were no faults or warning lights.

Thank you very much, I sincerely appreciate your help.
kasekasas
13th December, 2013, 11:37 AM
234748
Hi, can any look at the file and say it is correctly dpf removed o not?
thanks
twincam
13th December, 2013, 11:46 AM
It's correct.