MAZDA 626 PLS LOGIN KEY FROM DUMP

[almagssbe]

HELLO
PLS ADD KEY FROM DUMP MAZDA 626
TYPE IMMO
GE4T 67 5G2B
LUCAS 19AS 52010566B
S/N 5906279171

ID 33 T5
PLS HELP ME

[keysph]

try 7556 or 75562282pincode

also see:
A- One or no key programmed in the system

1) Insert the first key to be programmed (key 1) and turn on and off
repeatedly 5 times.
2) Turn on again with key 1. The anti-theft warning light will begin to
flash.
3) Turn off and wait 5 minutes.
4) When the warning light flashes more slowly, enter the password.
5) Turn on with key 1 within 15 seconds of illumination of the anti-theft
warning light.
6) Start the engine with key 1. After approx. 2 seconds the warning
light will go out (registration of key 1 over).
7) Turn off the engine and remove the key.
8) Within 15 seconds insert the second key to be programmed (key 2).
9) Turn on the engine with key 2. The warning light will illuminate and
after approx. 2 seconds go out (registration of key 2 over).
10) Repeat 7), 8), 9) for all other keys.
11) Remove the last key inserted and wait 20 seconds (programming over).

[almagssbe]

thanks
this car chip t5 33 or 8c

[keysph]

TMpro see it like id33

[almagssbe]

thanks
car start
t5 33

[johnybilly]

try 7556 or 75562282pincode

also see:
A- One or no key programmed in the system

1) Insert the first key to be programmed (key 1) and turn on and off
repeatedly 5 times.
2) Turn on again with key 1. The anti-theft warning light will begin to
flash.
3) Turn off and wait 5 minutes.
4) When the warning light flashes more slowly, enter the password.
5) Turn on with key 1 within 15 seconds of illumination of the anti-theft
warning light.
6) Start the engine with key 1. After approx. 2 seconds the warning
light will go out (registration of key 1 over).
7) Turn off the engine and remove the key.
8) Within 15 seconds insert the second key to be programmed (key 2).
9) Turn on the engine with key 2. The warning light will illuminate and
after approx. 2 seconds go out (registration of key 2 over).
10) Repeat 7), 8), 9) for all other keys.
11) Remove the last key inserted and wait 20 seconds (programming over).


hello keysph (http://www.digital-kaos.co.uk/forums/members/236256-keysph/),

Can u tell me where this info is from? i mean is it a program or pdf files? in autodata or zedbull or AD100 it doesnt have this kind of info...for key programming whithout a tool...

[keysph]

This manual procedures are applying to some old cars. Most of procedures are for programing a key when there is a key present. If no key must do it by dump or OBD.
In this particular case I see there is a procedure when no keys are available. First I see.
All info is from Silca Key Program.