Fgtech with 1 Led Problem "help to fix"

[fifas2010]

Fgtech with 1 Led problem


I have a galletto V2 (clone) with problems.
tested connecting the 12v by OBD, or direct in interface, and the result is the same
the software opens but does not indicate voltage reading, and does not advance this point
Does anyone have solution to fix this symptom

Best Regards235896

[infinityecu]

Fgtech with 1 Led problem


I have a galletto V2 (clone) with problems.
tested connecting the 12v by OBD, or direct in interface, and the result is the same
the software opens but does not indicate voltage reading, and does not advance this point
Does anyone have solution to fix this symptom

Best Regards235896


Ciao una volta aperta la schermata del programma devi provare con tutta l'alimentazione attaccata a staccare e riattaccare l'usb e vedrai che funzioner?........Ciao fammi sapere ;-)

[fifas2010]

Thank?s Sir
But you solution dont work in my case

But Thank?s
Merry Christmas to all DK`S

[mexanico1971]

try to write FTDI again !
the 2 files !
but before go to device manger and delete uninstall the FGT drivers ! them flash the ftdi
then not install the drivers automatically != select I choose the drivers for device , and select the drivers in the paste of the FGT2 !

good luck !

BR

[jokerrro]

I have the same problem in galletto 2, 3 LEDs.
short across a resistor 100kohm near the U13 under glass diode
someone knows the solution to the problem of LOW VOLTAGE?

[muner]

CONECT 12V EXTERNAL.