Iveco daily EDC16C39 correct DPF off

[Fec001]

Helllo!
Please switch off DPF correctly in this dump. I think somebody played the ECU before me, now car is in limp mode, no dtc, no lamps on.

[tonih]

Search the original before, for dpf no problem

[Fec001]

I have no ori, ECU comes to me like this and of course DPF is drilled :D

[Fec001]

I don't want it for free but I'm not sure about the problem is the DPF............

[ominimicu]

u get any errors? maybe it s adblue...

[Fec001]

only one error: cooling system(refrigerant) pressure or something. That's can be ignored I think.

[Fec001]

other strange problems about this ecu: I can read and write back ECUs own file with no problem with Galetto 2. But if I try to write another file with the same Bosch Nr. ECU go down, car doesn't start and can't diag.....
I'll upload that file what I tried to write back.

[Fec001]

I read this file from another daily ECU. If I copy car's immo data to this ECU, car is going well but EDC lamp is blinking and there is internal ECU error.

[oem]

Your file look like a original.

[waldi1979]

It is your ori file (BDM read).

[Fec001]

Tomorrow I'll try write BDM ori. Another interesting, BDM doesn't support this type of EDC16 family so I can use/read/write only single file reading..... If I write only flash separately with enforced buttons (flash, MPC, e2prom) I get ECU down too. Very interesting........

[oem]

Yeah. This is your ori bdm file. Your file read is not ori. Write, this is your file with all DTC ON. You have to see what is the problem and then write here again :)

[Fec001]

Thank oem, but as I said. I can't write flash only separately with BDM only single file, flash+e2prom

[flyins]

I can make dpf off, but not for free. If you are ready to pay for this service write me PM. If not wait for free solution from another tuner.

why you say not for free but if willing to pay service available? Is it coz YOU have to pay for service or because you wanna earn money?

[oem]

You can't flash over OBD?

[Fec001]

I can flash only car's own flash file what I read out with galetto, can't flash any other flash file.... With BDM, situation is the same.
I tried many files, with BDM and OBD too. Only can use ECU's own file

[Fec001]

Now I don't have time for this car so I send customer. When car was new it had the same problem no one can fix that, engineers came from Iveco and adjust something, don't know what, it had wiring problems too before ( shorted to ground) etc. etc. I got these infos today.......
Thanks all!