How to read/write Renault Megane II 2006 1.5dci

[eduzgz]

Hi, I'm abroad now and I have a trouble with this car, I've with me MPPS and Galletto 1260 , but I can't read the ECU, I don't know if I need to do something with the key card and the start/stop button.
Please if somebody knows how to do with those cables, I'll really appreciate any help, normally I use Kess v2 but I left it in London, so there are only those tools.
Thanks in advance.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[dannyuk89]

stall it this will put it into an open mode not sure if u will read that with a galletto anyways but could be wrong

[eduzgz]

stall it this will put it into an open mode not sure if u will read that with a galletto anyways but could be wrong

How can I do it?
Thanks for reply.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[digi men]

give the car in first gear,inseard the card and hold the start buton for 10 seconds ,than it must be in contact i hope it help you a litle more !

[eduzgz]

Thanks both.
I'll try that way.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[digi men]

i think galetto will not read this car ,maybe iam wrong ,try with mpps and can be that you need the to corect than the injector codes !

[dannyuk89]

i use kess v2 my self and i usualy just stall in in first gear and then read i tried to read by holding the key for ten secs so the ignition comes on but it wouldnt do it, but like i said im not sure i will be able to do it with galletto anway and i never used mpps

[eduzgz]

Galletto and MPPS both have the driver to read this car, normally don't use those cables, it's just for a friend because I'm Holliday when back to London I'll try with a customer with the same car, but with Kess v2
Thanks a lot for the information, I'll try and report.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[eduzgz]

I did read at the end with Kess v2 for a friend by obd port, MPPS and galletto 1260 doesn't work with this ECU.
I don't know if the original Galletto will work by obd, I don't think so, anyway I've got a Kess then no more problems in the future.
Thanks to everybody for the help.
Happy new year.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)