PDA

View Full Version : Smart ForFour CDI EDC16, BDM



Gizbern
28th December, 2013, 07:07 PM
I'm looking for connection for ECU Smart ForFour EDC16 by BDM
Flash is M58BW016xB
I have XprogM, and FGtech
Thanks!

Gizbern
1st January, 2014, 01:00 PM
Nobody ?
Happy New Year !

kennfeld
1st January, 2014, 01:30 PM
hello i have done some with cmdflash the connection is automatic because cmd supply a edc/med connector with the tool


warning file bdm content immo data in flash you may look your sam with data from other cars ...

Gizbern
1st January, 2014, 04:27 PM
Do You connect here ?
Thanks!

kennfeld
1st January, 2014, 06:08 PM
no it's like mercedes you need to remove all from the alu box ....
the connector is on the other side ...

there is risk of break the pcb
why do you want to do it bdm .?

works great over obd ...

MarkPRP
1st January, 2014, 06:55 PM
Or remove flash and mount one an Ecu already destroyed to read!

mbtun
1st January, 2014, 08:58 PM
BDM pads are on the other side of the PCB. It can be done but I would not risk on a customer ECU.

kennfeld
2nd January, 2014, 11:08 PM
i owned a forfour cdi 95 from 2004 to 2009 i did the first read bdm but later optican and cmd release a obd protocol can and kline
so i never more did it bdm after that

i sold the cdi but still have the 05 brabus forfour ;)

Gizbern
6th January, 2014, 10:18 PM
no it's like mercedes you need to remove all from the alu box ....
the connector is on the other side ...

there is risk of break the pcb
why do you want to do it bdm .?

works great over obd ...

Only by BDM, I can change VIN

kennfeld
6th January, 2014, 10:39 PM
if you change vin car no more start ....