PDA

View Full Version : Help me please WIth DIGIPROG3


pierre renault
28th December, 2013, 08:45 PM
Help me please WIth DIGIPROG3
Step by step procedure for CAS3 BY OBD? And
Procedure for Mercedes C W204 step by step. By OBD?
Thank you
CARPARTS
28th December, 2013, 09:46 PM
original or clone ?
pierre renault
28th December, 2013, 09:58 PM
clone .
teerak2uk
28th December, 2013, 10:07 PM
Car with cas do dash then do cas via obd then on count down plug dash in and cas takes from dash.

What car is it?
sparkz02
28th December, 2013, 10:13 PM
everytime I try to do CAS obd it says unknown version but then again, I don't know exact procedure, what do you mean on count down when it says searching?
pierre renault
28th December, 2013, 10:28 PM
cas 3 BMW 3 2008
teerak2uk
28th December, 2013, 10:47 PM
You do dash first I use rosfar r270 then plug digiprog into BMW obd and select program cars/trucks BMW - 3 SERIES ( E90-E93) - 3 CAS DIAG then it will read some data and when it asks for mileage change nothing and press tick ( ok ) tab then when completed it will say IKE INSTSLLATION you now have 60 seconds to plug dash back in then timer countdown starts and at the end will say ok then its done but if unknown version then cas needs to be done via something like rosfar r260
teerak2uk
28th December, 2013, 10:48 PM
I'm doing it with v4.88 but v4.82 should be fine
pierre renault
28th December, 2013, 10:50 PM
Ok for CAS BMW
FOR MB W204 dash and ezs ?
teerak2uk
28th December, 2013, 11:20 PM
Ok for CAS BMW
FOR MB W204 dash and ezs ?

You might be able to do dash only by obd i.e flashing but if not see attached files

237024
237025
237026
u.s
28th December, 2013, 11:41 PM
Ok for CAS BMW
FOR MB W204 dash and ezs ?

There is a thanks button that you can use!
waldi1979
28th December, 2013, 11:59 PM
You might be able to do dash only by obd i.e flashing but if not see attached files

237024
237025
237026

Hi,

When I can find english instructions for DigiProd3?
teerak2uk
29th December, 2013, 12:11 AM
Hi,

When I can find english instructions for DigiProd3?

Bing & Nitro do them:D
javyb
29th December, 2013, 12:23 AM
Ok for CAS BMW
FOR MB W204 dash and ezs ?

For mercedes start car so engine running select mercedes model select EZS change mileage the dash will automatically update mileage from EZS. Do assyst service and clear error simple
cristyand
30th December, 2013, 12:31 AM
For mercedes start car so engine running select mercedes model select EZS change mileage the dash will automatically update mileage from EZS. Do assyst service and clear error simple
Does this work with clone digiprog?
teerak2uk
30th December, 2013, 02:45 AM
Does this work with clone digiprog?

Yes it does