PDA

View Full Version : Honda fit or Jazz 2009 pinout for upa


claudio35
2nd January, 2014, 05:36 PM
Honda FIT or Jazz. Does anyone have and could you please tell me the pins to upa?

Is 93c76?
Thanks for the information ....
bram380
2nd January, 2014, 06:20 PM
EEPROM 93c76

Xprog connection (pin eeprom 93c76 to dashboard pcb):
pin 1 - CL203
pin 2 - CL202
pin 3 - CL201
pin 4 - CL200
pin 5 - Gnd
pin 6+8 - CL30
bram380
2nd January, 2014, 06:32 PM
power up connection:
Brown ---> +12VDC
Blue ---> Gnd
gogalv
2nd January, 2014, 08:27 PM
EEPROM 93c76

Xprog connection (pin eeprom 93c76 to dashboard pcb):
pin 1 - CL203
pin 2 - CL202
pin 3 - CL201
pin 4 - CL200
pin 5 - Gnd
pin 6+8 - CL30

So.... ?

237681
bram380
3rd January, 2014, 12:13 AM
So.... ?

237681

That's right for xprog.

pin 1 = xprog B0
pin 2 = xprog B1
pin 3 = xprog B2
pin 4 = xprog B3
pin 5 = xprog B4
pin 6+8 = xprog B5 + B7

I do not have the UPA and can not provide an image connection.
claudio35
3rd January, 2014, 02:07 AM
Also Works with UPA, but only with my homemade dongle, Solved. thanks to friends cooperating Bram380 and Gogalv
claudio35
3rd January, 2014, 08:09 PM
with upa usb + dongle = work

with upa usb only = no work
gogalv
3rd January, 2014, 11:52 PM
with upa usb + dongle = work

with upa usb only = no work

You have the Orange 5, try to make them, and there will never be problems or loss of dump !!!
digimile
4th January, 2014, 06:27 AM
hi
please upload schema of incircuit dongle....thanks
dcenteno
23rd June, 2019, 02:47 AM
What is the connection if I use Digiprog 3?
jomberykaso
23rd June, 2019, 02:49 AM
the same........ without using 12v power up
gervasio
23rd June, 2019, 08:32 PM
629935 CARPROG
dcenteno
24th June, 2019, 01:35 AM
Thank you very much.
Pin 1: CL203
Pin2: CL202
Pin3: CL201
Pin4: CL200
Pin5: Gnd
Pin6+7+8: CL30

Is correct? We tried with this configutation, but it did not work. Any idea? Thanks
clusters
24th June, 2019, 01:44 AM
Using digiprog, just connect 1 2 3 4 5 & 8

But you will have to use the eeprom menu to read and save a good file before you modify anything.
dcenteno
24th June, 2019, 02:03 AM
Thank you!
dcenteno
24th June, 2019, 10:58 PM
I tried with this connection:

Pin 1: CL203
Pin2: CL202
Pin3: CL201
Pin4: CL200
Pin5: Gnd
Pin8: CL30

But it did not work. I can make any mistake?

Thank you
dcenteno
7th July, 2019, 10:33 PM
I tried with this connection:

Pin 1: CL203
Pin2: CL202
Pin3: CL201
Pin4: CL200
Pin5: Gnd
Pin8: CL30

But it did not work. I can make any mistake?

Thank you