PDA

View Full Version : Renault Scenic II 1.9 dCi DPF off



omglol
3rd January, 2014, 11:44 AM
I am getting desperate on this one ... it's Renault Scenic II, make year 2006, with 1.9 dCi 130HP ... and DPF, of course. I have removed DPF physically, all sensors are connected and working OK. I have tried a few solutions, but none of them seem to work. After 100-200 km, "Regenerate FAP" message gets displayed and engine goes in regeneration mode (different sound, lacking response) ... after another 100 km, check engine goes ON and there is a fault code about too much unsuccessful regenerations.

Could somebody take a look at the files please? Many thanks in advance!

Files (ori+mod): https://www.dropbox.com/s/w45y3tkxlxqr49w/Renault%20Scenic%20II%201.9dCi%20130%20DPF.zip

digi men
3rd January, 2014, 12:25 PM
What tools you have use for dpf off ?

taxi300
3rd January, 2014, 02:23 PM
hi If the DPF system is disposed of correctly, you should never do: "DPF REGENERATION." then 100% was done with volta or ecusafe - only manual solution works on this ECU
thanks

mario38
3rd January, 2014, 03:00 PM
I am getting desperate on this one ... it's Renault Scenic II, make year 2006, with 1.9 dCi 130HP ... and DPF, of course. I have removed DPF physically, all sensors are connected and working OK. I have tried a few solutions, but none of them seem to work. After 100-200 km, "Regenerate FAP" message gets displayed and engine goes in regeneration mode (different sound, lacking response) ... after another 100 km, check engine goes ON and there is a fault code about too much unsuccessful regenerations.

Could somebody take a look at the files please? Many thanks in advance!

Files (ori+mod): https://www.dropbox.com/s/w45y3tkxlxqr49w/Renault%20Scenic%20II%201.9dCi%20130%20DPF.zip

Your file fap off are not good ...
in this type of ECU is only possible to do emulation fap off but your files with errors

mario38
3rd January, 2014, 03:00 PM
I am getting desperate on this one ... it's Renault Scenic II, make year 2006, with 1.9 dCi 130HP ... and DPF, of course. I have removed DPF physically, all sensors are connected and working OK. I have tried a few solutions, but none of them seem to work. After 100-200 km, "Regenerate FAP" message gets displayed and engine goes in regeneration mode (different sound, lacking response) ... after another 100 km, check engine goes ON and there is a fault code about too much unsuccessful regenerations.

Could somebody take a look at the files please? Many thanks in advance!

Files (ori+mod): https://www.dropbox.com/s/w45y3tkxlxqr49w/Renault%20Scenic%20II%201.9dCi%20130%20DPF.zip

Your file fap off are not good ...
in this type of ECU is only possible to do emulation fap off but your files with errors

omglol
3rd January, 2014, 11:58 PM
OK, can you help me correct the file? Or what do you mean by "emulation fap off"?