PDA

View Full Version : mazda 6 dpf off please



fes_786
5th January, 2014, 08:56 PM
hi guys

could some 1 do a proper dpf off for me??

had some 1 do it and got no fault codes
eml on
when u start car it jerks and if u clear eml cars fine for 50 / 100 miles then eml on and its flat

random faultcodes as if tables been deleted

need a proper manual solution please with DTC table intact

no bullsh*t volta / ecusafe or swiftech

the file is a decrypted kess cod file
which im told is same as normal bin file
will b getting a friend to write it with a kess master

thanks

Babos
5th January, 2014, 09:05 PM
yes is posibol made manual solution with active diagnostic.

drakov
5th January, 2014, 09:10 PM
Is this file a random file from similiar car or original file read from car with tool? Might be better to flash ecu with IDS and then read file again and have it done properly

fes_786
5th January, 2014, 10:04 PM
This is original file read after I did PCM update

I have kess slave so file was encrypted
Got master to decrypt and it's decrypted file I have posted

tunertool
5th January, 2014, 10:32 PM
This is original file read after I did PCM update

I have kess slave so file was encrypted
Got master to decrypt and it's decrypted file I have posted


Attached your file with DPF off!

fes_786
5th January, 2014, 11:39 PM
Cheers m8

Will test and report

fes_786
7th January, 2014, 04:55 AM
ok

seems like dpf sensors are gone

did the following after i load orignal file in ecu:

dpf reset
dpf sensor reset
oil reset
o2 sensor reset

use ford ids to do it

then loaded modded file

start car and after few mins dpf light and eml ON

3 faultcodes:

p2033
p0546
p0549

all these relate to egt sensors on dpf, seems like they nackered, also car is in limp mode quite sluggish but once u reset codes it drives fine for few miles then back again, no excess smoke so seems like i need a solution were sensors are emulated too ?

good news is i get proper fault codes now...lol

fes_786
8th January, 2014, 04:25 AM
a BIG thankyou to assitauto :)

he sent me dpf off file

no more regens and no smoke
no errors for sensors and cars driving perfect

cheers bro

officially SOLVED

assitutto
8th January, 2014, 07:13 PM
assitutto not assitauto :D

fes_786
8th January, 2014, 09:00 PM
Lmao sorry m8

Was late and couldn't be bothered looking for ur username on Dk

santosgb
17th April, 2017, 01:04 PM
hi assitutto (http://www.digital-kaos.co.uk/forums/member.php/51458-assitutto), wnder if you could exactly the same for me. much appreciated.

santosgb
17th April, 2017, 01:46 PM
a BIG thankyou to assitauto :)

he sent me dpf off file

no more regens and no smoke
no errors for sensors and cars driving perfect

cheers bro

officially SOLVED


year after....stillgood???

KYRON
7th June, 2018, 05:29 AM
BONJOUR
J'ai besoin DPF OFF ME TOO:larmes de joie:
THANKS

stanislav georgiev
13th April, 2019, 03:40 PM
Hello, I need to remove the three error codes p2033
p0546
p0549 egt sensors

pike
13th April, 2019, 07:17 PM
Hello, I need to remove the three error codes p2033
p0546
p0549 egt sensors

Hi, here DTCs off file

sonic 1989
13th April, 2019, 07:49 PM
hi dtc off pass pm