Mercedes E280CDI

[papalos_]

Hi mates and Happy New Year.

I want to "DPF-OFF" an EDC16 ecu.
At first, I need to get access to BDM pads to read flash. How to remove the PCB for aluminium bottom case???

Best Regards

[Babos]

BDM is back side

[papalos_]

I know that :top:
Any advise about removing PCB from aluminum bottom?

[mercis]

hard job,50% go ecu damage
solution

https://skydrive.live.com/?cid=5548e6680e78b98b&id=5548E6680E78B98B%21425&ithint=folder,.jpg&authkey=!AGr0XQOgxRVMLEE

[papalos_]

Thank you very much mate!
That is a risk...
I'll buy a galleto 2 clone to do this.

[papalos_]

Can someone help me to remove DPF on this file? ECUsafe 2.0.0.0 is not working...
This is original dump:


YEAR 2005
GEARBOX 7gtronic
EDC16CP31-6

Best Regards

[jp_olli]

I take credit for those pics. ;)

[MarkPRP]

I have a good solution to BDM pads on back!

Find Burnt (Or make) ECU and take aluminium casing off completely!
Now use this, open ECU top and de-solder flash. Solder to old ECU. Read by BDM then solder back to original ECU!

Job done!

[papalos_]

Can someone help me to remove DPF on this file? ECUsafe 2.0.0.0 is not working...
This is original dump:


YEAR 2005
GEARBOX 7gtronic
EDC16CP31-6

Best Regards

Nobody can do this?

[smayer]

I have a good solution to BDM pads on back!

Find Burnt (Or make) ECU and take aluminium casing off completely!
Now use this, open ECU top and de-solder flash. Solder to old ECU. Read by BDM then solder back to original ECU!

Job done!

Why all this work? galleto read and write by obd!!

[papalos_]

Why all this work? galleto read and write by obd!!

Any suggestion for a working china clone galletto2 that working on this ECU mate?

[MarkPRP]

Emulated EEPROM not read by obd...


Mark

[smayer]

Emulated EEPROM not read by obd...


Mark

Yes mate, but thread is about DPF-OFF.

[MarkPRP]

And its also about NOT DESTROYING AN ECU