PDA

View Full Version : Suzuki Grand Vitara EDC16C3 DPF_OFF



i_shot_the_sheriff
14th January, 2014, 01:13 PM
Hey mates,

I have a Suzuki Grand Vitara 1,9 diesel and i wanna make the dpf_off,,, i've tried with VOLTA sensors but dpf still on!

DPF is cleared from inside and all the sensors are plugged!

Is there a way to make it dpf_off?

It's kinda difficult because everytime i try a file i have to recode the immobilizer with Suzuki SDT....

Thanks in advance

ASEconsulting
14th January, 2014, 02:23 PM
Hello,
i can help. You can contact me.

furnata
14th January, 2014, 06:10 PM
Here you go mate pass on PM

i_shot_the_sheriff
16th April, 2014, 03:07 PM
I have another Grand Vitara DDiS EDC16C3 ecu and i read it on bench with CMD master!

I read flash - make DPF off with VOLTA - WRITE with CMD + make checksum with CMD function

Car started ok - idle ok - but when driven 1 kilometer suddenly stopped and won't start again!

Car starts with another ecu (dpf off ecu) fine!!!!!!! But not with the one i made with CMD+VOLTA

Is there a chance that CMD didn't write the checksum correctly?

Here's the files 255965

Can anyone help please?

atomiczen
16th April, 2014, 03:29 PM
read and write it with bdm
safest way on this ecu, sometimes loose inj coding

i_shot_the_sheriff
16th April, 2014, 03:41 PM
I read it with CMD from 10 pin BDM connectors,,, should i write the full bdm to make it ok??? Or the injectors need recoding?

FAP 0ff
17th April, 2014, 04:05 AM
for this car solution for dpf off is 1 byte.

i_shot_the_sheriff
17th April, 2014, 05:28 AM
Dpf switch 00256 turning to 00000?

Sent from my GT-I9505 using Tapatalk

haingoben
14th July, 2014, 07:50 PM
I have the same problem to make dpf off for grand vitara edc16c3,I make it with volta too, readind by ktag,dpf ligth is still ON ,and if car run fastly the dpf ligth is OFF !Volta can't do it correctly?
thanks

i_shot_the_sheriff
15th July, 2014, 08:49 AM
Correct! I have tried Volta on many Grand Vitaras and only ONE time it worked properly,,,,, all other times it had this problem.....! Volta is not that reliable..

haingoben
19th July, 2014, 05:58 PM
Hi, so what are the solution for you?If i can't use volta?T
hanks

oem
20th July, 2014, 05:36 PM
Solution is only manual. Volta and Ecusafe remove all dtc and post injection only. This is not enought. Engine will work every in Regeneration state 1. Without post injections but with turbo and soi strategy for regeneration.

haingoben
3rd August, 2014, 04:52 PM
hi
here is my file can u make it dpf off manuelly?
best regards271309

oem
4th August, 2014, 08:43 AM
Yes i can :)