New commando 15.00

[super jumbe]

Any idea when new commando 15.00 for DM500 going to be released?

[PaphosAL]

As soon as we've finished it! One aspect (ampersand character in channel name) is fighting us, but we'll nail it...

Be patient - AL ;)

[smirnoff_rules]

here it m8 ,, looks good , not sure if u can update or not , not by my dm at the minute http://rapidshare.com/share/C3A1006A402160A3D1E878E912870C08

[PaphosAL]

Just to be safe, guys, please run with this baby, as we had two false starts yesterday...

The OFFICIAL Commando 15.0 Release is datestamped 31.01.2014 10:21 today

Anything dated 30.Jan 14 is foo bar (my fault)

Lorra new stuff, so READING the new helpfiles is vital

C15 is NOT available as a C14.7 online update! It's a brand new release and time to move on now...

We'll still be maintaining C14.7 online updates for another couple of months, just to help the poor sods with locked-down boxes, thanks to greedy low-life traders making money out of our FREE shared work!

These bottom-feeder 'providers' are not gonna like C15 though, thanks to our wicked sense of humour, LOL!

Cheers- AL ;)

[smirnoff_rules]

nice image , clean fast and top class .. well-done lads

[super jumbe]

I will let you know good or bad!!

[satsmo]

Thread made a sticky for feedback and reviews.

[tkm18]

Dunno if is an issue with cams or image, mgcamd 1.38 work doesnt for me, cccam does. Ive added the lib file etc...

It shows on the softcam menu, but wont clear or connect.

And before i get the 'no cs' chat again, in the 14.7 discussion thread theres instructions how to install mgcamd etc...

Just leaving a wee bit of feedack.

Other than my issue, image seems spot on.

[super jumbe]

Brilliant mate keep up the good work PaphosAL, I can see lots of time put on this image.

[Dowie]

I love a new release!! Time to go and play Cheers

[flyingpig]

Can this be updated by transferring it to the tmp file and running that command via telnet? Or is it a full reflash using Dreamup?

Thanks Paphos_Al and your team..... Still love the DM500 and never lets me down.

Thanks,

[smirnoff_rules]

add to tmp and then settings and update and do a manual install if u like


Sent from my iPhone 5

[the man]

teting now , thanks
its very odd and un needed to have the epg set up this way, just make epg download for 24h on every channel , theres no need to have 2/3 days epg on some chs and none on others , 24h on every channel then we can set it up to auto download epg over nite ect .

[Jimmyinit]

My thanks go out to PaphosAL and everyone else who has contributed to this truly stunning piece of work, this little box cost me ?20.00 and you guys have made it into something worth many times that in building this image for it so thank you again for all your hard work and your generosity in giving this work to the world.

[smirnoff_rules]

how to you get adult channels working ? l have turned the option on and also in channels its on show not hide . did scan and so on but dosnt show ? any ideas

[satsmo]

Just to be safe, guys, please run with this baby, as we had two false starts yesterday...

The OFFICIAL Commando 15.0 Release is datestamped 31.01.2014 10:21 today

Anything dated 30.Jan 14 is foo bar (my fault)

Lorra new stuff, so READING the new helpfiles is vital

C15 is NOT available as a C14.7 online update! It's a brand new release and time to move on now...

We'll still be maintaining C14.7 online updates for another couple of months, just to help the poor sods with locked-down boxes, thanks to greedy low-life traders making money out of our FREE shared work!

These bottom-feeder 'providers' are not gonna like C15 though, thanks to our wicked sense of humour, LOL!

Cheers- AL ;)


Finally got a minute to pop this on the trusty DM500. And what a difference it makes, love the new boot logo!

Everything is as it says on the tin, (readme files), and I always do :) Autobouquets are spot on and I think I see where you have "spoiled" it for the bottom feeders, although I always try to change my root password via telnet at all times. Just having a problem doing it now ;)

I will report back over the next few days once I have run the image in a bit. Although I can't see a V15.1 anytime soon as it's hard to improve on this!

[mtv1]

i'm vexed now as i have no 500 to try it :mad:

[PaphosAL]

how to you get adult channels working ? l have turned the option on and also in channels its on show not hide . did scan and so on but dosnt show ? any ideas

"Did scan"? Please read the helpfiles, SR! More importantly, study the GUI hint lines more carefully when you change options in the 28.2E AutoBouquets Wizard menu on BLUE > BLUE > GREEN m8...

Changes will become active on the next run of AutoBouquets, if you can afford to wait for less than 60 seconds, LOL!

BTW- watching that shite will make you go blind, I hope you know that...

Cheers- AL ;)

[PaphosAL]

Just to mention, for typical 28.2E users running C15.0 there should be absolutely NO need to to run a Service Scan! Lraizer's latest AutoBouquets N1 does all this for you, in no time at all now...

For users on locked-down trader boxes stuck in the C14.7 time warp, we're still supporting daily monitoring and updates (if needed) of the AutoBouquets Fast Mode and repair kit options (both online only) until the end of March 2014. After that, online update OSD message will suggest that you manually upgrade to the infinitely superior Commando 15.0 image.

Cheers- AL ;)

[mtv1]

I done a maca went out an got a 500s flashing now can't wait :biggrin:

[mtv1]

I done a maca went out an got a 500s flashing now can't wait :biggrin:

box was dead tuner buggered :mad:

[mtv1]

ok got another one flashed it put it on the sat feed told it i was in Tipperary said say nothing no pop ups till done lit a ciggy missed the pop up did it again ffs your joking 30 seconds done :mad:


what an image well done to all involved think sats was a bit sarcastic bout the bootlogo do lol

well done :top:

[Jimmyinit]

Worked out the things that I had issues with.

[southpaw]

wowww, another awesome piece of coding , how you squeeze this much out of dated hardware is quite mind-boggling, well done fella`s
only slight issue/query i have is this , in the getepg text help file

So, the second field is 1 = EPG ON or 0 = EPG OFF. Easy one this. ON for prime channels,
but OFF for the naff ones, like those in News, Shopping, etc
not quite understanding how i config it to my preferences, ie, its a kids bedroom box so only want epg for kids + movies
any pointers most welcome:top:

[flyingpig]

Can I ask what this means?

""These bottom-feeder 'providers' are not gonna like C15 though, thanks to our wicked sense of humour, LOL!""

[satsmo]

Can I ask what this means?

""These bottom-feeder 'providers' are not gonna like C15 though, thanks to our wicked sense of humour, LOL!""




It means that traders can no longer lock the box with a password as you cannot change the root password via telnet or other. Good thing to protect the normal guy buying a box bad thing for the traders which I agree with.

However I and many others always change their password as it is another layer of protection when leaving a port open. A correctly configured firewall does this either way but it is still something that I think could be looked at in another way, which could lead to the same outcome of resetting the password as opposed to blocking a change at root level. As said just an opinion which is only based upon my usual "to do" list when installing a new image.

[southpaw]

Big decision that was and can see why it was made , but for me it pretty much renders the card slot useless on this image as i would be wary being locked down to default user pass for root access, am sure it was taken for the benefit of the majority of users tho , still awesome piece of work

[flyingpig]

Ah right.,.,., I am with you now.. Thanks Satsmo!! Yeah, on my boxes the passwords have all been changed as well.

[PaphosAL]

teting now , thanks
its very odd and un needed to have the epg set up this way, just make epg download for 24h on every channel , theres no need to have 2/3 days epg on some chs and none on others , 24h on every channel then we can set it up to auto download epg over nite ect .

Think outside of the box please, like Commando GetEPG has been doing for the past two years? This ain't OpenPLI epg, so many days for ALL channels, even crap ones you never watch, FFS!

If you read the helpfiles for GetEPG, they'll explain how you do all this, and why! It is NOT a good idea to set ALL channels for the same number of EPG days. If LraiZer (the designer of this epg platform) tells us this, and we pass this info onto YOU in the helpfiles, then WHY are you trying to foobar the system?

Premium Entertainment: 4 days
Premium Movies / Sports: 7 days
Average shite: 2 days
Stuff you rarely watch: 1 day
Total shite: 0 days

Nice to be in control, innit? Enigma can't do that, LOL! Muster the DM500 memory resources and use them to the best advantage is our way of pleasing users...

Cheers- AL :)

[PaphosAL]

On the password front, guys, Lincsat came up with a stunning idea, and Lraizer has helped us hard-code it deep inside the very heart of the neutrino binary itself...

In the next day or so, Commando 15.0b will see the passwd file back in /var/etc where it always has been, and still 'unpassworded'

If a user sets a password for user root via the Telnet passwd command, but then subsequently forgets what the password is (for Telnet / FTP / remote access), they will now have a new Settings Menu option (hard coded): Reset root password

...which will take the password back to C15.0b default, no password, along with accidental button press confirmation 6 sec time-out dialogue box, done message if confirmed, and bi-lingual too (English / German, depending on which lingo is default)

Jeez, we never sleep...

Cheers- AL ;)

[PaphosAL]

OK lads, you can now hit the online update button and upgrade to Commando 15.0b (15 Feb 2014).

Or if you prefer, reflash with the attached update image

Cheers- AL :)

[flyingpig]

Hello,

Updated to the latest version the other day, and all was working well. However, I went to watch BT sports the other day, but nothing was coming on, checked a few things and the channels seemed to work intermittently. Left it, went out, kicked the wife out of the other room - so managed to watch LFC.

Then yesterday, it wouldn't even display BBC1 so I just re flashed, but no transponders are showing, done a service scan says no valid transponders, try to do autoboquets - no luck.

So in normal state it is powered on, no picture, but when you press okay I get the menu saying signal strengh 97% BER 100....... But nothing on the tele in the way of a picture!!

ANy help - is my box knackered?

[derekjf]

hi sorry to ask this but ftp'd file over to /tmp but when i go settings manual update nothing is shown in the display box. am i being a nerd or is it the wrong format? box is currently running pli jade

update renamed to root.cramfs and all is ok. only very limited channels

[smirnoff_rules]

hi sorry to ask this but ftp'd file over to /tmp but when i go settings manual update nothing is shown in the display box. am i being a nerd or is it the wrong format? box is currently running pli jade

update renamed to root.cramfs and all is ok. only very limited channels

wot do u mean by limited channels ? u have add a cline havnt u


Sent from my iPhone 5

[monif]

Any idea when new commando 15.00 for DM500 going to be released?

its very nice image and isy to work

[derekjf]

have :rulez: but dont know where and how to install. newbie duh

[derekjf]

since doing auto update, have problem. chanells only display b/w cccam will not work dm 500-s

[smirnoff_rules]

since doing auto update, have problem. chanells only display b/w cccam will not work dm 500-s

thats not the image m8 .. u need to do and new install .. have flashed and install this image lots of times without a single problem

[derekjf]

thats not the image m8 .. u need to do and new install .. have flashed and install this image lots of times without a single problem


now it has frozen on loading screen. how can i reinstall without access to box commands?

update. box has now locked ftp out, will have to get null modem cable and try that.
let you know the outcome

[smirnoff_rules]

birmingham backup image if wanted here
and pil to commando image too

[d4rr3n]

Hi there, have just been given a DM 500s and wanted to check that this image is ok on clones? I don't want to kill it before I've even played with it ;-)

Darren

[smirnoff_rules]

it'll be fine m8

[derekjf]

now it has frozen on loading screen. how can i reinstall without access to box commands?

update. box has now locked ftp out, will have to get null modem cable and try that.
let you know the outcome

cable is ready for collection tomorrow, what is the best version to put back on the box?

thanks

[derekjf]

have now reflashed twice with rs cable, aan everythimg working except network. settings show ip add butt not allowing connection in filezilla or dcc or dreamup. any suggestions please

[smirnoff_rules]

have now reflashed twice with rs cable, aan everythimg working except network. settings show ip add butt not allowing connection in filezilla or dcc or dreamup. any suggestions please


change ip to an open one on your network and gateway to your router ip and restart network

[derekjf]

change ip to an open one on your network and gateway to your router ip and restart network

brilliant network now up and talking on all sytems. excuse silly question. how do i install newcamd to 15.0?

[super jumbe]

brilliant network now up and talking on all sytems. excuse silly question. how do i install newcamd to 15.0?

RULES no cam talking...

[derekjf]

RULES no cam talking...
sorry. no offence meant

[j1ksx]

Hi guys downloaded both 15 and 15b but getting an error extracting it - any ideas or anyone has a link to download working version.

[s33xy]

Hello guys, i am new to this dreambox stuff , i have insalled version 15.0 of Commando , first of all its not letting me into ftp with "root" and "dreambox" anymore , aswell as its stuck on loading. Anyhelp maybe ? , would be appreciated.

P.S: when i scan for service it says, transponder fail.

[mercuryrob]

Hi to all, I am currently using 14.7 ( love it with it's auto channel update etc ..only problem was the out of sync ) can I update from my current image to this new one without reflashing my dm500s box .. quick step by step tip greatfully apreciated ! Did this new one cure the sync issue ?

Many thanks

[digicon]

Hi to all, I am currently using 14.7 ( love it with it's auto channel update etc ..only problem was the out of sync ) can I update from my current image to this new one without reflashing my dm500s box .. quick step by step tip greatfully apreciated ! Did this new one cure the sync issue ?

Many thanks


Perhaps taking the time to read the First page of this thread would answer your question: http://www.digital-kaos.co.uk/forums/f214/new-commando-15-00-a-395259/#post2216657

[rigsby71]

Hi to all, I am currently using 14.7 ( love it with it's auto channel update etc ..only problem was the out of sync ) can I update from my current image to this new one without reflashing my dm500s box .. quick step by step tip greatfully apreciated ! Did this new one cure the sync issue ?

Many thanks

I recently updated a box from 14.7 to 15.0 using the online updater using the blue button..worked really well.

[jonnyboy123]

Hi all,

I have read the whole tread so only asking as got a bit stuck here.

I have a Dreambox 500s that I would like to make use of. It has the Gemini image when you put it on but I would like to add this image as the box as not been used for 2 years and it looks like the easiest way to also update channels.

I appreciate the process may be simple but is there a user guide on how to add this image to the box. Sorry if this has already been asked.

regards John.

[mtv1]

dreamup

get box connected to rs32 and net

open dreamup and follow instructions here http://www.digital-kaos.co.uk/forums/f213/guide-flashing-dreambox-dreamup-42950/

then you need to add the magic :eek:

file 1 goes to var/etc/emu

file 2 goes to var/etc

put the prize into var/etc/magic ;)

[jonnyboy123]

dreamup

get box connected to rs32 and net

open dreamup and follow instructions here http://www.digital-kaos.co.uk/forums/f213/guide-flashing-dreambox-dreamup-42950/

then you need to add the magic :eek:

file 1 goes to var/etc/emu

file 2 goes to var/etc

put the prize into var/etc/magic ;)

Thanks MTV1....giving it a go now!!

Will post back the outcome ( hopefully positive!)

[jonnyboy123]

Sorry MTV1,

I do not own a null modem cable - would this work connected to the network?

Regards John.

[jonnyboy123]

Sorry MTV1,

I do not own a null modem cable - would this work connected to the network?

Regards John.

Hi all,

After reading through various threads on this forum I downloaded FlashWizardPro to install Commando 15. I then added the image to the tmp directory and FWP creates a file that you can then boot from.

However the screen now does display the Commando 15 image but it justs hangs there. Does anyone have any advise on the matter please?

Regards John.

[paul93]

how to update online 14.7 to 15 please

[stum]

Hi .. My set-up is a DM500s going to a Diseqc switch via diseqc 1.0. One on the inputs into the switch comes from my Sky Dish. Another is going to my motorised dish via Diseqc 1.2. I am trying to install New Commando ver 15.0. The dreambox loads up ok and on boot-up goes straight to BBC1 London. I can't see anyway of setting my configuration up. Usually I do this via a non standard option on set-up. Any help would be appreciated.. Thanks.. Stum..

[jonnyboy123]

Hi all,

Sorry but would anyone know what I should do as stuck on the Commando image when I start the DM.

Regards John.

[paul93]

How to get back adult channels on commando 15 help will be appreciated thanks in advance

[n3fta]

Just wondering if this image can be used in North America?

[jonnyboy123]

Sorry all,

But can anyone please help me with my query.

Regards John.

[psats]

Sorry all,

But can anyone please help me with my query.

Regards John.
sounds like bad flash you will need to use dreamup

http://www.digital-kaos.co.uk/forums/f213/guide-flashing-dreambox-dreamup-42950/

[jonnyboy123]

Read post 55 and buy a null modem cable. :)

JoK

Thank you both for the feedback - I shall buy a null modem cable ( saw one on Ebay for under ?2 ) and give it another go.

I did actually read quite a lot on the forum before trying via the network but obviously for me it was not going to work :(

Regards John

[fay28]

thanks for image

loaded up fine but in network settings i cannot obtain the ip address of the box, tried to restart network but no joy.

can anyone help please?

[plasterer]

Have you got dhcp enabled
If not you need to enter it manualy
Enable dhcp and reboot the box .................Paul

[fay28]

hi guys ignore my post box had faulty network port, however i h ave put the image on another box which is all fine apart from how do i install the cccam plugin?

does the image come with the plugin?

[MW35]

Sorry to say but this image is a nightmare just updated from 14.7 to 15 through the receiver everything seemed to go great, now it's telling me there's no boutiques I've done a channel scan finds the channels no problem but now it's just locked on one
I'll go back to the old image

[suttsy]

Hi lads,
I'm currently in a spot of bother, I've got my hands on a Blade BM500s, which appears to be password protected.
I have tried to FTP into it with no luck, I've tried to re-flash it with DreamUp with null modem cable without any luck either.
I'd appreciate any help with this, is there someway of a factory reset maybe.:banghead:

Suttsy

[MW35]

I've gone back to 4.7 which is working great, for some reason the update through the box to 15 is just too many problems from me unless I'm doing something wrong as I cannot get boutiques organised at all.

[paul93]

Network Issue on Commando 15 C on DM500V8
i am using homeplugs for DM500S and its running great.but on DM500V8 i flashed commando 15C which is flashed fine but on the same homeplugs it says on network settings
dbox reachable (Ping)
Default Gateway Unreachable (Socket Error)
DNS Server " "
Via IP (88.198.50.98) " "
i put the ip address of my box manually i did DHPC off and then i put my ip address manually and then rebooted but it says what i have already mentioned.
when i put DHPC on and reboot the box it all disappears like ip address and Default Gateway is MT
what shall i do in this situation because when i put other box it runs fine.if some one can pm me and explain me what to do i will really appriciate it.Thanks in advance

[paul93]

Network Issue on Commando 15 C on DM500V8
i am using homeplugs for DM500S and its running great.but on DM500V8 i flashed commando 15C which is flashed fine but on the same homeplugs it says on network settings
dbox reachable (Ping)
Default Gateway Unreachable (Socket Error)
DNS Server " "
Via IP (88.198.50.98) " "
i put the ip address of my box manually i did DHPC off and then i put my ip address manually and then rebooted but it says what i have already mentioned.
when i put DHPC on and reboot the box it all disappears like ip address and Default Gateway is MT
what shall i do in this situation because when i put other box it runs fine.if some one can pm me and explain me what to do i will really appriciate it.Thanks in advance

[husk24]

hi guys

I am using commando 15.d and when I scan, I seem to have lost half of my channels, looks like transponders and frequencies have changed. How to ensure this is all upto date for me to get all the latest channels/frequencies?

thanks

[psats]

try the newer image
http://www.digital-kaos.co.uk/forums/showthread.php/473034-Commando-15-1a-for-DM500S-and-DM500C-test-image

[chickenkicker99]

how do you add auto autobouquet to a image??

[maca]

Look here but remember the rules http://www.digital-kaos.co.uk/forums/showthread.php/366366-All-in-One-GetEpg-amp-E1-28-2e-AutoBouquets-image

[WOODWARD395]

dreamup

get box connected to rs32 and net

open dreamup and follow instructions here http://www.digital-kaos.co.uk/forums/f213/guide-flashing-dreambox-dreamup-42950/

then you need to add the magic :eek:

file 1 goes to var/etc/emu

file 2 goes to var/etc

put the prize into var/etc/magic ;)

:giveup:Got my magic in my box and it states its there in var/ect/emu. but not active and tells me to wave my wand in the next menu but cannot see how to turn the lights on in the menu sure I am going daft any little pointers where the switch is as its very dark at present.:withstupid:

[plasterer]

Make sure your attributes sre 755 after transfer
try blue button
maybe commando toolbox .not at the box now
just make sure its active in there........Paul

[WOODWARD395]

This is the first time using Enigma 1 is there anything else I should be aware of doing a first install anywhere Thanks.
discovered one of my files was corrupt from a bad download on my previous problem but still not there yet.

[WOODWARD395]

:bawling: Thanks for your help plasterer much appreciated as said totally in the dark as to why it wont work the box is faulty or just one simple setting, its so annoying
as it only takes me 10 to 15 mins to setup my Enigma 2 box if that from scratch. Thanks again.:withstupid:

on reading similar posts I think although it states all is well with network connection and my other box DM800HD connects fine, what would be the best image to try with every thing installed for a test.
I have used network plugs and wireless adapter now I will purchase a 30mtr cable this week just trying to eliminate anything and everything.

[WOODWARD395]

Just flashed this image http://www.digital-kaos.co.uk/forums/showthread.php/366366-All-in-One-GetEpg-amp-E1-28-2e-AutoBouquets-image and used same files and up and running totally baffled to why as exactly same setup as on commando.
Another problem you get is when an online re-flash is done and you try to use autoboquets it will not work have tried several times with same results.

[WOODWARD395]

The image is working great on my DM500S clone and is a great image yet for some unknown reason will not work on my original DM500S baffled.

[psats]

The image is working great on my DM500S clone and is a great image yet for some unknown reason will not work on my original DM500S baffled.

why not get the updated c15.1a from there site