Check immo emulator renault

[auto4]

Hi, Please,

I'd like to ask a question, to see if anyone can help.
Today, I installed an immo emulator in one uce from renault scenic 1.9 dti (1 plug). But it has not worked. I modified the eprom?s dump (immo off), but the car started only once, and immo on again.
I suspect that the emulator is defective. Is there any method to check if the emulator works correctly?
I have Oscilloscope, if it is necessary.

Regards

.241242241243

[Mr BLACK]

what eeprom you read for immo off ?

[tqnata83]

cut pin 59 on ecu
make eeprom like pic
sold emulator or WP

[auto4]

what eeprom you read for immo off ?

I read and write 24C02.

[auto4]

cut pin 59 on ecu
make eeprom like pic
sold emulator or WP

I already cut the pin 59, I put the eprom like pic and put the immo emulator.

As it did not work the emulator solution, I finally had to do WP.
But my question is why did not it work the emulator? Today I checked the emulator with the oscilloscope and it gives signal, so I think the emulator works properly.

[camelbox]

This emulator not work on this ecu, i have identical problematic. i am solved at another type of renault emulator:top:

[Min2xx]

Confirmed! This emu not work on this ecu, use another emu type!

[Shmortz]

I use emulator with attiny2313 and never had problems on any renault, I did over 30 DTi's and all work great... how did you make eeprom virgin? I write FF only in adresses 40 to 5F

[Min2xx]

I use this instruction, FF from 40 to 5F work too