PDA

View Full Version : 2005/2006 Volvo XC90 D5 2.5 Diesel R/W



motorsportsz
23rd January, 2014, 07:31 PM
Hi there
Has anyone managed to successfully read and write this via obd with galletto mini v48?

Cheers

pulsar2000
23rd January, 2014, 07:50 PM
which ecu you talking about ??
should be edc16 in which case most should go via obd,,,

Manum50
23rd January, 2014, 07:54 PM
If you connect K Line of ECU to K line of OBD by wire. I think you should do it by pin or by BDM.

jp_olli
23rd January, 2014, 08:49 PM
Bench flashing is quite common for this.

overs0ull
23rd January, 2014, 08:58 PM
on the bench ,just with pin connection and all be fine ,or whit bdm will be all sure cause you will have all to recover if something is go wrong .

Babos
23rd January, 2014, 09:02 PM
there is edc16c31

motorsportsz
24th January, 2014, 07:17 PM
Okay followed the pin out guide on fgtechnology documents. It didn't work
http://img.tapatalk.com/d/14/01/25/8ema8atu.jpg

Then I came across this pin out guide on wiki obdtuning
http://img.tapatalk.com/d/14/01/25/yru5yda7.jpg
This one I have not yet tried. Which is right, which is wrong ?

Babos
24th January, 2014, 08:33 PM
i use fgtech pin out and all work well without problem!!
Best regards.

motorsportsz
24th January, 2014, 08:34 PM
Didn't work for me :(

Babos
24th January, 2014, 08:44 PM
how you do?
you must use cable tricore and DC adater.
one my friend have clone china and cant to work with volvo!!maybe that is same problem!

waldi1979
24th January, 2014, 11:28 PM
Tricore cable and:

Pin 6 - BLACK
Pin 43 - GREEN

motorsportsz
25th January, 2014, 01:48 AM
Tricore cable and:

Pin 6 - BLACK
Pin 43 - GREEN

I will try this tomorrow. Cheers


And no it's definitely a European model

motorsportsz
25th January, 2014, 12:46 PM
Did not work

motorsportsz
25th January, 2014, 08:38 PM
Update

Ecu did get done. Whilst connected to the car

overs0ull
25th January, 2014, 10:19 PM
try it over bdm - if pin out didn't work . I thing you version of galleto 2 v48 can't read it but why - i don't know .
I thing you should try to read it via BDM or obd but whit other tool - like mpps v12-v16 , kess v2 and to see are it will work with other tool .
I have the same problems whit edc16c31 on BMW 530 e60 i can't read it ia obd with galleto 2 v52 or kess v2 clone or mpps v12 ori whit any tool . But after few mod on my galleto 2 a can read it now via obd and K-line almost all cars and k-line work perfect .
We will help you how we can but try whit other tool and over BDM