PDA

View Full Version : Audi A6 2.7 DTC On Please



kumbari
30th January, 2014, 03:29 PM
Hi All ! I have Read the flash Audi A6 2.7 and need to restore dtc on this file . So this file is made by ecusafe and i have not original flash . The customer have replaced DPF , so had buy new filter but i cannt access fault codes. Can any replace DTC sector on this file ?

Alpinesport
30th January, 2014, 08:38 PM
Need a bdm read or a good read from ori tool

scartplug
31st January, 2014, 12:17 AM
Can u give Ecu number and details

monitel_service
31st January, 2014, 02:40 AM
Your file and pls press CKS button after write file if you use BDM100 this tool don't made CKS in write mode

veloseeped
31st January, 2014, 05:33 AM
Your file

It's file from 4F1910401R v.0060 ECU
Topicstarter request was for 4F1910401B v.0030.
R and B boxes use different hardware and dumps can't be replaced.

Diagnosticated
31st January, 2014, 08:46 AM
Hi All ! I have Read the flash Audi A6 2.7 and need to restore dtc on this file . So this file is made by ecusafe and i have not original flash . The customer have replaced DPF , so had buy new filter but i cannt access fault codes. Can any replace DTC sector on this file ?
This should be your original file with DTC sector replaced. It is an .ols file so it will need changing before use and checksum calc.