Peug. 206_MM_48P.70 with 1.1l engine to make power 1.4ll it is possible!?

[electrones]

Helloo m8s This is madness, but I wonder if there is someone available to help me transform Peug. 206_MM_48P.70 with 1.1l engine to make power 1.4l keeping the unit "MM-48P.70." I have attached the file, No more appreciate the cooperationsCheers

[gad3n]

you want to break the laws of physics :)

[mislav88]

i think he wants to use ecu from 1.1 on 1.4 engine, not to "expand" 1.1 engine to 1.4

[electrones]

i think he wants to use ecu from 1.1 on 1.4 engine, not to "expand" 1.1 engine to 1.4


Yes, you are right, someone can help me please!!!

Thanksss

[Zmann]

48P2.70 ? Try it youself

Remove 29F400 from the working ECU and put it on another. Use PP2000 or Diagbox doing SW upgrade for you (off line), carefully select the proper engine and the ECU. The last version of PP2000 or DB ver < 5.44 should work fine. Post if the diag tools do not allow to do so.

[electrones]

48P2.70 ? Try it youself

Remove 29F400 from the working ECU and put it on another. Use PP2000 or Diagbox doing SW upgrade for you (off line), carefully select the proper engine and the ECU. The last version of PP2000 or DB ver < 5.44 should work fine. Post if the diag tools do not allow to do so.


THank friend

But my PP200 is clone and is not working very well "as due, has flaws", and idon?t know how do it!!Friends i need help to make this dump from ECU 206 1.1l to transform the dump as from ECU1.4l, if it is possiple,


Thanks in advance.
Cheers

[Zmann]

You're quite in hard time then. Only a possibility left I think is to virginise the SW package you want (e.g. the dump of 1.4L ECU) and use PP2000 to code it (replacement parts: ECU) and need ori PIN. Unfortunately the PIN in your 48P2.70 dump is not available but that's notmal on some of the cars. So need to find it somewhere else such as the BSI or the card. Maybe upload 1.4L dump to let me see what I can do.

[electrones]

Hi Zmann (http://www.digital-kaos.co.uk/forums/members/110615-zmann/)
Here is orig dump from Peugeot 206 1.1l HFX 48P2.70

I need your help m8
Thanks in advance
cheers

[Zmann]

After your two uploads I still a bit confuse of which one you want to use when to finish the job? first upload is for 1.4L?

Btw you can't go any further unless getting the PIN also!

[electrones]

After your two uploads I still a bit confuse of which one you want to use when to finish the job? first upload is for 1.4L?

Btw you can't go any further unless getting the PIN also!

hello Zmann (http://www.digital-kaos.co.uk/forums/members/110615-zmann/)


Maybe you misunderstood me, the 1st file is peug.206 1.1l 48P2.70 with immo off
The 1.1L engine in the car died, i not found another equal to place, so i want to see if possible to transform the map 48P2.70 to work with a 1.4l engine if possible.
2nd file is the original 1.1L engine 48P2.70

Regards

[Zmann]

Hello electrones,

What the 1.4L engine code is ORGINALLY equipped with the ECU MM 48P2.xx ?, I don't have the info. If the engine is original with another ECU type completely I think to adapt 48P2.xx on it not so easy.

[electrones]

Hello electrones,

What the 1.4L engine code is ORGINALLY equipped with the ECU MM 48P2.xx ?, I don't have the info. If the engine is original with another ECU type completely I think to adapt 48P2.xx on it not so easy.

Correct, friend to 1.4l engine, there is no MM48P2.XX.
For 1.4l engine is MM1AP.XX, now my question does anyone here working on chiptuning could help with this if possible "increasing the time of injection and ignition and others calibrations that has to be done, so you can work mapping system with a engine 1.4l.
It is not easy but I think here we have solution for everything, is not!
Regards friend
Cheers