Audi a6 3.0 tdi asb edc16cp34 dpf

[hadrian]

Hello. Ecu read and write by bdm. Car do not accept regeneration or reset dpf to new. Dpf off by switch in flash. Shoot level reset to zero with ecusafe. Checksum calculated after write by bdm.
Car start, dpf clogged error disappear but i have U0301 Software Incompatibility with Engine Control Module, lamp on and no power.

Please help me

243155

[taras_rx7]

Disconnect all dpf sensor (diff press ,temp ) and enjoi.

[Babos]

+100 many times is see that

[hadrian]

After some km i have internal eeprom error. For the moment only temperature sender G235 and G448 is disconnected.
I will put back the original eeprom. Please verify my eeprom because ash reset is made with ecusafe. Seems modifications is not ok.

[totalfree]

Hi.
Your file DPF OFF

[hadrian]

Thanks totalfree but my flash file is ok. Eeprom modifications by ecusafe is not ok. But is not necessary.
With my file and disconnection of differential pressure sender and exhaust temperature sender car is ok. Thanks again taras_rx7.

[Diagnosticated]

Hello. Ecu read and write by bdm. Car do not accept regeneration or reset dpf to new. Dpf off by switch in flash. Shoot level reset to zero with ecusafe. Checksum calculated after write by bdm.
Car start, dpf clogged error disappear but i have U0301 Software Incompatibility with Engine Control Module, lamp on and no power.

Please help me



243155
Try changing 1EE5F8 from 00256 to 00000. This may work.