transporder type to use Suzuki G. Vitara 2002/3, help please!

[electrones]

Hi friends

which type transponder should I use for suzuki G. vitara 2002/3, denso ECU number 33920-76JD; IMMO BOX number 33970-80G0.
what should I read to add keys on ecu "eeprom"?? on immo box i have 24C01
4d 60; 65
Thanks in advance

[simaservis1108]

Hello friend,

Use 4C transponder.This is type 2 immobox.

[electrones]

Hello friend,

Use 4C transponder.This is type 2 immobox.

I tried with 4c but do not work for me, i used SBB programmer.
I have read somewhere that for this immo box i need use 4d but,4d 60, 65, 66!? Help please!

Thanks in advance
Cheers

[simaservis1108]

A dump from immobox would certanly help...

[totalkey]

did your sbb error "key not loaded"?

[electrones]

did your sbb error "key not loaded"?

hi m8

yes, 'm the 2nd person to work on this car do not know if something changed.
I will read and report tomorrow "dumps"

Thanks in advance
cheers

[totalkey]

"key not loaded" mean wrong transponder usually

[ngakson2002]

Hi friends

which type transponder should I use for suzuki G. vitara 2002/3, denso ECU number 33920-76JD; IMMO BOX number 33970-80G0.
what should I read to add keys on ecu "eeprom"?? on immo box i have 24C01
4d 60; 65
Thanks in advance

Hello Mate

Transponder suitable for this immobox is the ID 4D65

Regards

[electrones]

A dump from immobox would certanly help...

Hi m8

Here is immo box & ECU dumps

Someone can add key for me please!!!

Thanks in advance

[ngakson2002]

Hi m8

Here is immo box & ECU dumps

Someone can add key for me please!!!

Thanks in advance

Hello Mate,
I have checked your immo dump with softwares such as Tmpro2 and EFfi that supports this vehicle and dump is not recognized.May be corrupted during reading?Whatever the case check.

Good luck

[simaservis1108]

Definitely 24C01 badly read,confirming what ngakson2002,dump is not recognized.Also I checked your dump with editor,keys are deleted.

[electrones]

Hi friends

I need unsolder 24c01 to read or nor need !!??
I read it with eeprom in circuit maybe there is problem
cheers

[keygargoil]

33970-80g0 is 4d65
33970-67j0 is id46

[electrones]

Hi friends

I read the 24c01 out of the loop but got the same file.
Does someone could please repair the file or get yourself a pair of file to ecu and immo box.
Maybe someone cam help to add key :
Pg1 F9 Lock
pg2 00 Unlock
pg3 E41D0116 Lock

Thanks in advance.
cheers

[RhinomanUK]

Its been flashed with the wrong files. The 1202 number in the immo file identifies it as being for an old Vitara 1.6 16V and not a Grand Vitara. I don't have the correct files, maybe someone else can help.

[simaservis1108]

Here friend,I repaired your immo dump with 2 keys.
Try to load this file into keymaker and make TPX2.

[electrones]

Thank you m8
But i do not have keymaker that can support this type of immo box, i got EFfI but the version does not support.
If you can add key, i?ll appreciate your help
Pg1 F9 Lock
pg2 00 Unlock
pg3 E41D0116 Lock
pg4 0000000000 Unlock

[simaservis1108]

Sorry friend,I can add your key to dump,but I don't know where is Page 4 located.Page 4 you need to write on transponder.We will see what other members say.
Sorry I am not ID65 expert...
BTW,here is my Effi screenshot,it recognizes repaired dump.Key values were deleted.

[electrones]

THank m8,


Your EFfi is more advanced, i have tried to enroll in the forum created by Sierra but unsuccessfully dont know how to acquir the new modules and what are the cars so far borne!?
Any idea!?
I'll try to get the key with SBB and report, this can be without being pre-coded!?

[electrones]

Hi m8s

I would like to thank everyone who helped in the resolution of this problem,
Everything is resolved



Cheers