View Full Version : Peugeot 207 MEV17.4
angelvoodoo
4th February, 2014, 09:46 AM
Is there an original file for 207 Bosch MEV17.4
9665291180
or can make immo off this one?243764
jjrp255630
4th February, 2014, 10:29 AM
hi, you file ask a pass
angelvoodoo
4th February, 2014, 10:41 AM
sorry my mistake243775
ttzag
4th February, 2014, 10:46 AM
how did you read this ecu?
angelvoodoo
4th February, 2014, 11:12 AM
fgtech galleto 2 v 53
ttzag
4th February, 2014, 11:17 AM
obd or by boot mode?
angelvoodoo
4th February, 2014, 11:20 AM
by boot mode
jjrp255630
4th February, 2014, 11:24 AM
friend, read eeprom and mcu seperated
angelvoodoo
4th February, 2014, 11:31 AM
friend try this dump243780
ankara06
4th February, 2014, 11:33 AM
Is there an original file for 207 Bosch MEV17.4
9665291180
or can make immo off this one?243764
upload flash
angelvoodoo
4th February, 2014, 11:37 AM
ok flash and eeprom from same ecu
243781
243782
ttzag
4th February, 2014, 11:47 AM
by boot mode please can u attach a photo and tag on it where is a boot point ?
angelvoodoo
4th February, 2014, 12:02 PM
here you go
243786243787
ankara06
4th February, 2014, 12:11 PM
try this and report please
angelvoodoo
4th February, 2014, 12:16 PM
this is flash?
what about eeprom?
angelvoodoo
4th February, 2014, 01:03 PM
car did not start
ecu is locked, could not pair it with the bsi
only telecoding was removed
umoussa
4th February, 2014, 01:30 PM
Are you sure this flash dump is from the ecu, or you find it somewhere and uploaded it?
angelvoodoo
4th February, 2014, 01:32 PM
the dump is from second hand ecu
i need to replace the cars ecu
that is why i need clear dump
umoussa
4th February, 2014, 01:39 PM
Wait
Did you send the full reading of the second hand ecu (EEPROM + Flash)
Or
You send Original EEPROM from Car and Internal Flash from Second hand Ecu?
angelvoodoo
4th February, 2014, 01:47 PM
on 11 post i uploaded second hand eeprom and flash
umoussa
4th February, 2014, 02:56 PM
Can you give me the fault code stored on the ecu?
P????
angelvoodoo
4th February, 2014, 02:58 PM
it keeps giving me p1340
angelvoodoo
4th February, 2014, 02:59 PM
wait
second hand ecu does not give me any p codes
it is locked
umoussa
4th February, 2014, 03:11 PM
What is the tool you used for Reading and Writing?
angelvoodoo
4th February, 2014, 03:14 PM
fgtech falleto2 v53
umoussa
4th February, 2014, 03:55 PM
Am not sure if this will correct your trouble or not, but you may try to write the original files back
angelvoodoo
4th February, 2014, 04:01 PM
Am not sure if this will correct your trouble or not, but you may try to write the original files back
first thing i did is to copy files from damaged ecu to the second hand
but it transfered the problem
that is why i look for a virgin file or immo off
antlio
4th February, 2014, 05:00 PM
Hi
Try this and post results . Pass is in your pm .
regards
angelvoodoo
5th February, 2014, 01:14 PM
your file worked thanks so much
but problem is not engine ecu
problem is a tiny crack on cylinder head that expands when engine is hot.
the difference in compression is very small to be recognized but engine ecu "sees it"
thanks everyone for the time that you have spented for me
antlio
5th February, 2014, 05:47 PM
Hi
Thanks for your answer . Car is 1.4L or 1.6L ?
regards
rapkopat
12th February, 2014, 12:20 AM
help plaese paswoord
unu
3rd March, 2014, 08:53 AM
I have the same problem with one ecu from scrapyard ... Can you mod file to reuse it onto other car ?
Thank you ! U
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.