Peugeot 307 battery low

[ConceptSP]

I have a 307 1.6nfu bosch m7.4.4
Flat battery erased bsi module, i read motorola, but no pin in bsi...
I read engine ecu, calculated pin with psa calculator , but when i tried to program bsi and keys, pps said pin wrong!
Psa said pin (G1KE) i tried and swap, but no luck.
If someone have some smarter calculator, or if this is correct pin, tell some idea...
And all doors are shut tight when i tried.
Thanks in advance
ConceptSP

[Zmann]

Read back your posts and see your several questions with answers and see your '0' thanks in the profile, anyway here should be some useful info...

- PIN G1KE is 100% correct
- As you know the BSI dump is corrupted but I notice the unusual data in the PIN locations and that might cause PP2000 difficulty. Virginise the bSI and try with G1KE again.

[ConceptSP]

I virginised bsi module, then i start to program.
Maybe virgin dump is bad.
And, i didnt know where to hit thanks button, but i liked every help i got.
I am newbie, sorry to all

[ConceptSP]

Have tested hc912 bsi virgin dump?

[kostas]

you need to unlock the ECU with PP2000.

[ConceptSP]

Engine ecu i guess?
I worked this a lot, and i never virginised ecu, just program bsi and old keys work again.

[Zmann]

Have tested hc912 bsi virgin dump?
Try the dump by a nice VIP here

http://www.digital-kaos.co.uk/forums/f178/peugeot-307-bsi-change-289174/

[gttuning]

if you have peugeot dealer tow it down no point to spend time on it will cost you 40euros job one in 30min.

[Shmortz]

your pin is right, here is tested virgin BSI dump, that's all you need...

[plagu]

I had the same issue while ago, battery gone dead and bsi corrupted.
First i just reprogrammed the bsi with pps but i could not programm keys, justcould not get to programming phase the pin just did not work, then i virginized with above dump reprogramemd and everything worked like it should.

[ConceptSP]

Solved with programming other bsi, this is water damaged...
Thanks to all mates.