View Full Version : Problem when trying to open VuCC
ayrraider
7th February, 2014, 12:09 PM
When I tried to load some files on my Vu+solo box I get an error message as below
"Error Vucc.ini file missing in C:\user\user\App Data\Local\Temp\jzip\jzip2E256\lzip303BC\" and Filezilla does not open as usual.
I have used this software before with out any issues I don't understand what has happen now
Any help will be greatly appreciated
Jazzyjef
DOUGALMCD
7th February, 2014, 03:30 PM
Looks like you have a file missing on hdd so wont let filezilla open. uninstall it and redownload.
ayrraider
7th February, 2014, 08:55 PM
Looks like you have a file missing on hdd so wont let filezilla open. uninstall it and redownload.
I have done that few times, with no change, what else do I need to download, what do you mean by HDD is it Vu solo or the computer
IAmATeaf
9th February, 2014, 10:09 PM
If all you are trying to do is run FileZilla then can run that by itself rather than via VuCC
ayrraider
10th February, 2014, 04:09 PM
When opening Filezilla Client all I get is a blank page, what part I need to fill in eg what to put in "Host, Username,Password, Port" I have a Vusolo2 box
cheers
DOUGALMCD
10th February, 2014, 05:59 PM
Host = ip address of box in router ie 192.168.0.5 username = root leave rest blank press quickconnect should be ok
ayrraider
11th February, 2014, 10:51 PM
Host = ip address of box in router ie 192.168.0.5 username = root leave rest blank press quickconnect should be ok
I did all that but the answer I get is as below
"Status: Connecting to 192.168.1.5:21...
Status: Connection established, waiting for welcome message...
Error: Connection timed out
Error: Could not connect to server
Status: Waiting to retry...
Status: Connecting to 192.168.1.5:21...
Status: Connection established, waiting for welcome message...
Error: Connection timed out
Error: Could not connect to server
DOUGALMCD
12th February, 2014, 09:23 AM
It wont connect if you used 192.168.0.5 because that was an example I gave you. The box will have it own ip in your router. Once you have the box's ip put that in host.
ayrraider
12th February, 2014, 09:51 PM
It wont connect if you used 192.168.0.5 because that was an example I gave you. The box will have it own ip in your router. Once you have the box's ip put that in host.
This time I am geting similar message as below.
Status: Connecting to 192.168.1.5:21...
Status: Connection established, waiting for welcome message...
Response: 220 Welcome to the vuplus FTP service!
Command: USER root
Response: 331 Please specify the password.
Command: PASS
Response: 530 Login incorrect.
Error: Critical error
Error: Could not connect to server
P&D
12th February, 2014, 11:46 PM
password wrong
If you don't know it
goto the drop down menu see if its stored in there
ayrraider
13th February, 2014, 02:37 PM
password wrong
If you don't know it
goto the drop down menu see if its stored in there
Sorry P&D what drop down menu and where, I am afraid not too clever with all the this techinal setallite jargan I am learning the hard way, one of these day I might get hang of it thanks for all the help.
DOUGALMCD
13th February, 2014, 03:07 PM
The drop down button at the right of quickconnect shows the history and if you have connected before it may still show line with right password.
P&D
13th February, 2014, 07:10 PM
Sorry P&D what drop down menu and where, I am afraid not too clever with all the this techinal setallite jargan I am learning the hard way, one of these day I might get hang of it thanks for all the help.
Thats why i added the photo 2 post's above (take the blinkers off) lol ;)
ayrraider
13th February, 2014, 08:10 PM
Thats why i added the photo 2 post's above (take the blinkers off) lol ;)
I am getting same type of error as below
Status: Connecting to 192.168.1.5:21...
Status: Connection established, waiting for welcome message...
Response: 220 Welcome to the vuplus FTP service!
Command: USER root
Response: 331 Please specify the password.
Command: PASS
Response: 530 Login incorrect.
Error: Critical error
Error: Could not connect to server
Status: Connecting to 192.168.1.5:21...
Status: Connection established, waiting for welcome message...
Response: 220 Welcome to the vuplus FTP service!
Command: USER root
Response: 331 Please specify the password.
Command: PASS
Response: 530 Login incorrect.
Error: Critical error
Error: Could not connect to server
P&D
13th February, 2014, 08:41 PM
where did you get the box from ???
contact them & ask them the password & user name
ayrraider
14th February, 2014, 02:31 PM
I got both Vusolo and Vusolo2 from World-of-Satellite, I have sent them an email see how long they take?
P&D
14th February, 2014, 09:23 PM
Hi try
normally factory set is....
User= root
pass= leave blank (don't type leave blank)
try to connect
ayrraider
15th February, 2014, 12:58 PM
Eventually got the Vusolo2 working with DCC Thanks very much for all your suport and rest of Forums help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.