PDA

View Full Version : PEUGEOT 306 SAGEM SL 96-2 NEED IMMO OFF



speedcar
7th February, 2014, 11:55 PM
Hi,

I need help to do immo off to ECU SAGEM PSA SL 96-2, TMS 374, two M28F256 memories,

thanks.

maciej
8th February, 2014, 10:24 AM
Clean the feed by inserting cleaning SL96 After cleaning, we disturbing transmission shorts while filming starter
pin 22 or 24 to ground flasche 2-3 times programmed back to an original content
Flasch. Pass PM

autoecu
8th February, 2014, 10:38 AM
PEUGEOT 306 SAGEM SL 96-2 NEED IMMO OF

speedcar
10th February, 2014, 07:47 PM
Thanks for your help Maciej, but I can?t understand this process can you explain step by step please

speedcar
10th February, 2014, 07:49 PM
Thanks for your help Autoecu, which one of the files can I use on TMS 374, you sent me three, thanks again.

maciej
10th February, 2014, 08:25 PM
1.Clean the moment inserting a cleaning charge SL96
2.during start-up starter
3.pin 22 or 24 flash shorted to ground 2-3 times.
If the contents of the flash will leak and does not control the fuel pump be programmed back the original content flash

speedcar
12th February, 2014, 01:13 AM
this process is in the 28F512 or TMS 374? thanks for your help.

doublexx
12th February, 2014, 09:37 AM
Cut immo line from ecu pin 27 - 48. Put ecu on the car. Turn ignition ON and In the 28F512 pin 22 to ground 5-10 times. Start the car and remove the wire from pin 22 in 28F512.

gabrielasihay
31st August, 2020, 05:33 AM
cula es la contraseņa de l archivo