MB Sprinter 2.2CDI 2007 EDC16CP31 virgin state ECU

[chiorbeq]

Hi to all DK's,I want to change ECU on this Sprinter with a scrap one somebody can help me to virgin this ECU?Thank's!

[fruti]

I can help you ... But can you read e2p ? I tis ST95P8 or SP08C3
Regards

[Joe019]

For make virgin this ecu, you must read all FLASH by BDM....

[chiorbeq]

All flash read by bdm is a very risky operation!I crash another ecu when I try to dismantling !Now this ECU don't communicate at all on OBD only in BDM mode.If you have a solution to read without demage ECU tell me!Thank's for reply!

[gery11]

Cant you write whole bdm read to the scrap ecu?

[soplillo]

All flash read by bdm is a very risky operation!I crash another ecu when I try to dismantling !Now this ECU don't communicate at all on OBD only in BDM mode.If you have a solution to read without demage ECU tell me!Thank's for reply!

Why is a risk operation read this ecu by BDM?? I don't underand, maybe if your wrtie the ecu wrong by bdm you can damage the ecu.

[smayer]

The risk it?s not read by bdm but open the ecu to read, pcb is very hard to remove without demage.

[dikseln]

During the opened the eCU you have risk to demage that. You need to hot the ecu before opening it.

[albdiag]

Do not open the ecu just make a hole as in picture to read on BDM.

See attachment 245175

This is my primitive way to open them :). So far has been good . Must be careful from particles going inside but i grind it until hole appears than remove the fine plate left with screwdriver.
http://www.youtube.com/watch?v=zGRJ96oaRpk&feature=youtu.be

G


I need full bdm for
spriner cr4.20
0281014344
A6461501677

[soplillo]

Do not open the ecu just make a hole as in picture to read on BDM.

See attachment 245175

This is my primitive way to open them :). So far has been good . Must be careful from particles going inside but i grind it until hole appears than remove the fine plate left with screwdriver.
How to open sprinter ecu edc16 cr4 for bdm read - YouTube (http://www.youtube.com/watch?v=zGRJ96oaRpk&feature=youtu.be)

G


I need full bdm for
spriner cr4.20
0281014344
A6461501677


Juas!!! Ooh my good It's amazing that the ecu still works!!! :beheaded:

[chiorbeq]

I drill the aluminium cast and I read and write the ECU!

[vladoford1]

450739
try this

[Gavra]

That ECU can be renewed without opening ......

[chiorbeq]

Have you a solution?