View Full Version : HARDWARE DELPHI 2013.3 vs SW AUTOCOM 2013.3
maku120677
9th February, 2014, 10:51 AM
hello, a question .... and can run hardware delphi obd 2013.3 .... with software autocom 2013.3???
dopsleutel13
9th February, 2014, 11:13 AM
hello, a question .... and can run hardware delphi obd 2013.3 .... with software autocom 2013.3???
Yes it can , The software is the same only the color is blue !and more brand's in same package by Autocom ! (that why its bigger)
You can use different install key's in Autocom .
Try this .
INSTALLING AUTOCOM or similar .
Brand: Autocom a-710-479
Software: Cars
Version: 2.13.2
-----AUTOCOM-----
a-710-479 = cdp (ds150e) cars << serial 5 digits
a-710-254 = cdp (ds150e) trucks
a-710-142 = cdp+ (ds150e new vci) cars << serial 6 digits
a-710-210 = cdp+ (ds150e new vci) trucks
-----ECLIPSE EDIS-----
e-212-479 = cdp (ds150e) cars
e-212-254 = cdp (ds150e) trucks
e-212-142 = cdp+ (ds150e new vci)
e-212-210 = cdp+ (ds150e new vci) trucks
:top:
-----OPUS-----
o-409-479 = cdp (ds150e) cars
o-409-254 = cdp (ds150e) trucks
o-409-142 = cdp+ (ds150e new vci) cars
o-409-210 = cdp+ (ds150e new vci) trucks
Meko Diagnostic ;
m-025-479 = Cars
m-025-254 = Trucks
Motorscan :
m-461-479 = cars
m-461-254 = trucks
***********************
maku120677
9th February, 2014, 11:59 AM
then you do not need to be any changes to hardware ob2 firmaware?? software can be installed without any modification? (forgive my poor English)
xtech
9th February, 2014, 12:40 PM
even you can use software from wow wutrh is beter then autocom
maku120677
9th February, 2014, 01:38 PM
Thank you. I always saw how to turn the car ..... but as the procedure to be also activate the truck??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.