Iveco '03 with Bosch black immo box 41221184 and 93S56 eeprom - need 2 PCF7935

[obdsystems]

Hi guys,

I need help - my AVDI keytagtool doesn't recognise the file - it expects a 93C46.

Is there some way i can give you the pcf7935 data from 2 chips. customer wants 2 keys.

I need Tango -its on my list

Thanks in advance for any help.

Steve 245143

[TPS]

that Iveco use chip Philips PCF7936

prepare chip 7936 end learn with diagnostic device

[obdsystems]

that Iveco use chip Philips PCF7936
prepare chip 7936 end learn with diagnostic device

You are right - immo code has extracted pin from dump and see i can pre-code.
Cos of the Fiat locks i assumed keys needed pre-coding via dump - silly me!!!

[keygargoil]

the keys do need a pre coding but zed bull will do that for you

[obdsystems]

Or Miraclone!

[lunchb0x]

TMPro does too. I believe it can also do it from just the PIN if you knew that , saves pulling the immo box which is in the tightest spot :)

[obdsystems]

Definitely not by diagnostics unless you have a 1960s style plug -

Did by zed bull today via a mate but still seems to have issue unfortunately -hopefully just battery.

[TPS]

if you have T 300 i will help

[obdsystems]

if you have T 300 i will help

Thanks - yeah in the end i stuck my AD's K-line in pin 30 of that Iveco's 1960's connector and the job was done!!!

Zedbull failed??? Diagnostics succeeded guys -so i eat my words (yet again)

[lunchb0x]

The Cable from AD is $80 in Australia so would be less for the rest of the world. More than paid for it's self on the one job.