LEXUS IS220D Lost keys 2007

[mscauto]

Hi, i have just been asked to supply and program a new proximity key for a Lexus 1s220d on a 2007. All keys have been lost. I have a dealer remote key. I have tried to reset the car using a ad100 pro and mvp pro and it doesnt work. It communicates under type 2 but always fails to reset it.Tech Stream doesnt have a reset immo. Is there another way to reset the immo/smart system? Where are these modules? I looked in the boot area and see it, unless it is really hidden. I started to strip the dash out was told it wasnt there. Also seems difficult as i cant open the passenger door as it is deadlocked.

Any advice on this will be greatly appreciated.

I can read chips processors etc... if needed to virginise a unit . I have ad900 if this will help me to generate a key.

Many thanks

Dan

[gwee]

smart ecu location.

[mscauto]

245607Hi thanks for the box location. Attached is the smart box file. How do i generate a key? Virginise the file?
Thanks
Dan

[gwee]

You have 3 options here:

1. Write these pages to TPX2 / EH2 / Blank 4D and start car:
pg1- 94
pg2- 35
pg3- D4 BB 0D 1A
pg4- 9A 05 BE 5B 7B

2. Post Smart Key Pg1,2,3,8.

3. Open dash and locate ID code box and post ID code dump 93c46.

[marco70]

What kind of hardware you can so add the used card to smartkey?

[immomaniac]

Read ecu id code and post the dump here. I guess you have limited resources to do option 1 and 2

[marco70]

That is why I asked the question what equipment does

Tango ZedBull

[gwee]

No rocket science, many tools can do option 1....even zedbull clone can do.

[marco70]

So what to choose because I'm going to buy?

I'm sorry about that not

[mscauto]

Hi, how do you write all 4 pages? AD900 will write 3 pages but wont write the 4th page. I have not written 4d all pages before. I asked hickleys and they dont know how to.

[gwee]

Can you read your smart key?

Post all pages that you can read, will add key to dump.

[mscauto]

I cant read the key. I have old ad900, new ad900 and clone z bull

[gwee]

Too bad, open dash and remove ID Code box, read 93c46 and post here.

[mscauto]

Ok, where is it behind dash? I have already started to strip it. I dont want to damage the dash, the passenger door is deadlocked and i cant release the passenger side of the dash. Is there a trick to do this?

[gwee]

id code location, rhd and lhd.

[immomaniac]

.............

[lidons]

Hi I have the same problem.
I have no idea how to start this lexus, I read this and I aimed a little better.

Now I have a query.
TM100 can add key-smart?
TM100 does not appear in dialogue with lexus smart-box, serve the Toyota?
If I buy a smart key, first I have to virginizar smart-box?

[lidons]

if you want to start the car before getting the smart key, post smart dump, will give u 4 pages to write to tpx2

- Gwee if you help me, we will make a start key first,:)


smart ecu location. post#2

I will locate the smart-Ecu and go dumps you.

Question- manual emergency key, take off the car alarm from the door? or when the car engine starts?:questionmark:

[lidons]

Here are info

[kyawkyaw]

hello, sir , need to help for toyota passo 2010 years smart remote card, how to make new key, please help me sir

thanks you very much:call::call:

[ronny01]

I have the same problem can some one help me i have the id box dump and ive read the key with my fvdi

[hrmotorsport]

Hi, i have a is220d with allkeylost. i have dump from idcode 93c46

i have tango but no activated toyota, but if necessary i buyit
i have zedfull too

[hrmotorsport]

somebody know if need dissasembly smartecu?

[schouten1977]

buy thango and make eveything by obd great for lost key situation

[hrmotorsport]

Avdi have this feature too?

Enviado desde mi ALP-L09 mediante Tapatalk

[rola1971]

skp900 doit this lexus is220 from 2006 you all lost situation in 15 min.work 100%.
good luck

[satefut]

Hi. My friend got a Lexus IS220d 2007 from auction with no working key (car came with key and the key has been tested and works). Previous owner said car battery died and after replacing battery car doesn't start. No key detected flashes on the dash. I reset the smart box but when plugged my autel im508 says 1key registered to car. I thought I need to reset the ID box also so I removed the dash and reset also the ID box. At the moment there is no change. The ignition still cannot be turned on in order to program a key. The key that came with the car has page 94, 4d chip. The car asks for the same values but something is not right. I have Autel im508 and xhorse key tool max pro. I read the chips on bench from both smart box and ID box with my xp400 pro programmer and tried to add a key on bench with my key tool max pro. I used the smart key that came with the car and procedure said successful, but when I read the new file the key is still not added. When I open the bin file from smart box my xhorse shows 0 keys, but when the smart box is plugged to the car, says 1 key registered. I don't know what I do wrong here. Can anyone advice how to fix this issue? Thanks