Help to change km on Vw Caddy 2006 VDO 24LC32

[soxten]

Hi
I need help to change km on this Vw Caddy 2006
I did try Tachosoft but it don`t get it correct.

I need 169900km in my dash.
The file here is 123451km

Is it possible to count this bytes by my self, or how is the crypto working?

245912

[arvedo]

micronas friends this is, I think it just makes for obd2.

[soxten]

I did change in eeprom from 19600km to this 123451 but tachosoft is not doing correct calk.

So it is in eeprom.

My carorog don't connect this car by obd... (Canbus)

[cotymoto]

With d?giprog 3 only 1 min. Ecu 4 min

Enviado desde mi SM-N9005 mediante Tapatalk

[baze007]

2k0 920 842A vdd 24.05.05

[baze007]

in first post need 169000km on second 16900km

[soxten]

Work perfekt THX!!!

[baze007]

17020km.............................

[MIKE756]

Hi i have one 2007 dash dead , and one 2006 working i need to put the real in KM in the working dash , i have the dump of 24lc32

thanks

[sida]

Hi i have one 2007 dash dead , and one 2006 working i need to put the real in KM in the working dash , i have the dump of 24lc32

thanks

Post your dump

[MIKE756]

This is the backup , i need to change to 102215km old dash , thanks

[MIKE756]

I need to say too , the fail in the old dash is external temp fail , and fuel meter fail , whit the new dash both working .

Thanks for your time sida .

[antenor]

Here you are.......:02.47-tranquillity:

[MIKE756]

hI antenor , is great !! just reprogramed and power on the dash using 12v , and show 102215 km !! a lot of thanks you

Mike

[H2Deetoo]

>I need to say too , the fail in the old dash is external temp fail , and fuel meter fail

VDO clusters have a common GROUND for these 2 sensors (temp + fuel) and on occasion this ground trace is burnt open (due to some short I guess).
If you fix this burnt trace with a simple wire connection then both sensors will work again.


Rgs H2Deetoo

[MIKE756]

Thanks , i dont see a bad trace but i will double check this because my mystake i do not think in transponder key , and maybe whit the new dash the engine will not power on .. i will check on monday , thanks H2Deetoo

Mike

[MIKE756]

Hi thanks i will double check this , because my mystake i dont think in transponder key and maybe the key will not power on engine .. i will try it on monday . Thanks H2Deetoo

Mike