View Full Version : VAUXHALL ASTRA PIN CODE
Tango1
21st February, 2014, 05:58 PM
Hi there, could someone help me with the pin for a astra 2001. Thanks
vuno01
21st February, 2014, 05:59 PM
Opcom can do it via obd
Tango1
21st February, 2014, 06:03 PM
I do have opcom, could you pls tell me how ? Thanks
drz
21st February, 2014, 06:21 PM
Have to read immobox. No pin in dash. No way with opcom.
flyins
22nd February, 2014, 12:47 AM
like drz said read immo box (around ignition barrel) tms chip read with xprog then zedbull should do it mate, someone else may know another way, but this is how its done mate
Tango1
22nd February, 2014, 05:26 PM
Thanks, I have read the immo box with xprog. don't have zbull !!
TPS
22nd February, 2014, 05:30 PM
PIN 2959
Tango1
22nd February, 2014, 06:57 PM
I'll try and let u know. Thanks
TPS
22nd February, 2014, 07:12 PM
PIN 2959 is 100% right :joyous:
drz
22nd February, 2014, 08:31 PM
PIN 2959 is 100% right :joyous:
100% right
Tango1
24th February, 2014, 03:18 PM
Hi all, pin 100% correct. Thanks. Another problem is the original car ecu was damaged, bought a 2nd hand ecu and having problems coding it in via op-com. Could anyone please tell me the procure. Astra 2001. Thanks
TPS
24th February, 2014, 06:36 PM
Astra 2001 with engine code ... ???
ECU ..... ???
Shmortz
24th February, 2014, 06:41 PM
is the ECU reset from old car, if not you need first to reset it using old car pin, then it's easy to program it to car with op-com...
...if ECU is not reset and you don't know pin from old car post info for ECU to help you...
Tango1
24th February, 2014, 06:53 PM
OP-COM - KW2000 Communication Window> 2003|Astra-G|Engine|Y 17 DT
Keyword #1: EF
Keyword #2: 8F
Normal timing parameter set.
VIN: W0L0TGF4815237648
RepairShopCodeOrTesterSerialNumber: DELCOLVP14
ProgrammingDate: 20030313
systemSupplierECUHardwareNumber: DEL 0113386350
vehicleManufacturerECUHardwareNumber 97306575 EA
systemSupplierECUSoftwareNumber: DMRW
systemSupplierECUSoftwareVersionNumber: 0003
exhaustRegulationOrTypeApprovalNumber: D01011
systemNameOrEngineType: Y17DT
Identifier: 1305
CalibrationDate: STRCB0A
Total number of fault codes: 3
P1530 - A/C Relay Voltage Low
(04) - Present
P1614 - Wrong Transponder Key
(04) - Present
P1611 - Wrong Security Code Entered
(00) - Present
Hi this is the ecu info, I do not have the pin from the 2nd hand ecu.
flyins
24th February, 2014, 11:00 PM
Cant carprog read pin fron delco ecu? HDRC Y17DT?
OPEL login reader from motor hybrid ECU. (http://www.codecard.lt/carprog/software/opel-login-reader-from-motor-hybrid-ecu-works-with-bosch-me1-5-5-siemens-simtec71-simtec71-1-delco-diesel-delco-multec-/prod_129.html)
Ive read afew pins from the simtec and Delco Multec HSFI ecus with carprog
Tango1
24th February, 2014, 11:19 PM
I have a mate with carprog, will that get the pin out of ecu? If it does work what's the procedure with op-com? Thnks
ruffles1986
24th February, 2014, 11:43 PM
I think not pin in dash...
Tango1
25th February, 2014, 10:33 AM
Hi there, managed to read pin for ecu with carprog. just need to know procedure with op-com. Thanks
Shmortz
25th February, 2014, 11:08 AM
why didn't you reset ECU with carprog?
...now with op-com go in engine ECU, find in special functions or programing 'reset ECU' option, reset it using his pin code, change VIN, then go to immobiliser -> special functions, enter cars security code, then go to program imobiliser function, choose Engine Controller installed, and OK, at the end you should see successfuly programed, check will stop blink and you can start car...
Tango1
25th February, 2014, 07:08 PM
Sorted, never thought to reset ecu with carprog !! Thanks for al the help, really appreciated.
flyins
25th February, 2014, 07:16 PM
Sorted, never thought to reset ecu with carprog !! Thanks for al the help, really appreciated.
Your welcome mate, glad you sorted it
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.