joe1953
24th February, 2014, 01:16 AM
Hello,
i want remove IMMO from ECU with TMS374 Decoder.
This connection are necassary:
PIN 1 --- 12v+
PIN 2\3\18 --- GND
PIN 37 Immo line (cut)
Nothing is described about the Signal Wire. Does i have to connect the Signal wire with the Reset Pin on the 27C512?
Manual:
http://www.sinodownloads.com/down/download/PDF/3502054-TMS374_ECU_DECODER_manual.pdf
i want remove IMMO from ECU with TMS374 Decoder.
This connection are necassary:
PIN 1 --- 12v+
PIN 2\3\18 --- GND
PIN 37 Immo line (cut)
Nothing is described about the Signal Wire. Does i have to connect the Signal wire with the Reset Pin on the 27C512?
Manual:
http://www.sinodownloads.com/down/download/PDF/3502054-TMS374_ECU_DECODER_manual.pdf