PDA

View Full Version : HELP JEEP WRANGLER 09



speedcar
26th February, 2014, 12:12 AM
Hello,
Please help me, I have a JEEP WRANGLER 2009 dash with 93C76 eeprom 125654 miles.
I would like 65000 miles.

Many Thanks

XmoDDeR
26th February, 2014, 02:20 AM
HERE YOU GO MY FRIEND TRY AND REPORT REMEMBER THANKS...GOOD LUCK

Illusion
26th February, 2014, 04:39 AM
I think theres the SRI-5 to do in these as well

bender
26th February, 2014, 07:10 AM
never mine about sri for now, the above will give the odo..ERROR

Safety
26th February, 2014, 09:14 AM
here 65000 miles .

XmoDDeR
26th February, 2014, 03:09 PM
never mine about sri for now, the above will give the odo..ERROR


BENDER HOW SO MY FILE AND SAFTEY ARE THE SAME WILL BOTH RESULT IN ERROR THANKS , CAN EXPLAIN
?

speedcar
26th February, 2014, 05:13 PM
Thanks! I will try and report

bender
26th February, 2014, 07:22 PM
BENDER HOW SO MY FILE AND SAFTEY ARE THE SAME WILL BOTH RESULT IN ERROR THANKS , CAN EXPLAIN
?

http://www.digital-kaos.co.uk/forums/f174/jeep-wrangler-2010-tacho-168812/#post1948134

Post#1- VB - 1396km wanted 0009km
Post#4- rcvantonio - posted attachment - 40km (NOT TESTED)
Post#5 VB - KM solved before Post#4 posted -- meaning he never tested rcvantonio attachment of 40km..the 40km dump till todate not tested.
Post#12 automan123 - use both post#1 & post#4(this is not tested solution) for comparison to help other.
post#4 dump of 40km might work for its 40km but not anything higher, that occupy all the running order of all the lines needed see post#1's 1396km
now if you use post#4 attachment for correcting km, Do you think it'll not give ERROR?
I hope I'm wrong, but this are how I see it.

digimile
27th February, 2014, 06:11 AM
hi
u can digprog clone in this cluster and it works...over obd2...thanks

speedcar
28th February, 2014, 09:07 PM
Problem solved, tested, works fine,

Thanks to all!!!

bender
4th March, 2014, 01:17 AM
Problem solved, tested, works fine,

Thanks to all!!!

solved by OBD11 or eeprom?