j link segger dead after update by mistake

[sergionel]

has anybody dump from at91sam7S64 from j link segger clone? by mistake i push yes for update firmware(i use ver. 4.80a)and now the interface is dead.

thanks in advance!


sergiu

[kazek123]

Everything to ver. 4.54

[SEGGER J-LINK] Programator przesta? dzia?a? - 2 - elektroda.pl (http://www.elektroda.pl/rtvforum/viewtopic.php?t=1794179&postdays=0&postorder=asc&highlight=j\\-link&start=30&sid=62e2a5944c4db1565d05793c92e61bcf)

[Dunker]

I changed the serial number in mine and also the features string before uploading the new firmware. No issues at all with using the very latest software from Segger.

[sergionel]

thanks for info!
i found same info on forum sonsivri.to.please tell me how i can change the string(string gdbfull to gdb??) and serial number in the j link v8 firmware?now if i use soft version 4.8 recognize the interface like a clone.with other older soft work ..

thanks again!

[attilaa0]

I have a clone V8. i have been used with 4.80 version ,i updated also and nothing happent.It work very vell.
I have a dump ,maybe you can use.

[sergionel]

i will try it and report here.

thanks!

[sergionel]

all is ok with this dump.

thanks again!