PDA

View Full Version : remove dtc p2015



rdu04
4th March, 2014, 05:41 PM
hello can help me please remove dtc p2015?
car passat 2005 engine 2,0 edc 17
read flash with mpps
VW Hardware Number: 03L907309
VW Software Number: 0489
VW System Type: R4 2,0L EDC G000SG
VW Engine Code: CBDC
VW System Data: EDC17_CP14
Flash Attempts: 2 Times
Flash Programmed Ok: 2 Times

this is error

Address 01: Engine Labels: None
Control Module Part Number: 03L 997 026 C HW: 03L 907 309
Component and/or Version: R4 2,0L EDC G000SG 0489
Software Coding: 0000071
Work Shop Code: WSC 79651 146 06706
VCID: 336EA8A6522E49B
1 Fault Found

008213 - Intake Manifold Flap Position Sensor (Bank 1)
P2015 - 000 - Implausible Signal - MIL ON
Freeze Frame
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Mileage: 165379 km
Time Indication: 0
Date: 2113.14.20
Time: 19:01:23

Freeze Frame
RPM: 0 /min
Speed: 0.0 km/h
Load: 0.0 %
Lambda: 11.8 %
Lambda: -3.9 %
Voltage: 0.304 V
Bin. Bits: 00000000


Readiness: 1 1 0 0 1

can help me modified flash or ideea from this error?

StepOn Chiptuning
4th March, 2014, 07:08 PM
248610


Your DTC removed

rdu04
5th March, 2014, 07:16 AM
thanks StepOn Chiptuning (http://www.digital-kaos.co.uk/forums/members/409153-stepon-chiptuning/) test and post results but




check the password please is not good

StepOn Chiptuning
5th March, 2014, 09:07 AM
248697

I have forget pass. here new pass

rdu04
5th March, 2014, 07:32 PM
thanks again