Dacia Sandero 2013 A2C80612912 clear dump

[Hack01]

Hi,i need clear dump for :
Dacia Sandero 2013 Continental
A2C80612912
13.06.16
12H00221 S0470 C074
985103207R - - -
Mcu:ST SPC560P50L3

[Hack01]

Hallo,please heelp me.

[Hack01]

No one knows?

[Corneliuss]

Wich what programmer have You readed that processor ???

[Hack01]

ETL,Smok.....

[Hack01]

Hallo
No one knows?

[Hack01]

Hi,send me clear dump.

[Ginocar]

Hi,
How you could read this mcu? Which is programmer the best?
Can you know the settings for jlink?
If you can help me I can send the new ECU dump without crash.
BR

[Hack01]

Hallo
No one knows?

[Ginocar]

Hi Hack01,
I could to read an airbag ecu of Dacia Lodgy with no crash.
Pass in PM

[Hack01]

Hi,
thanks for your reply, but linked archive (Lodgy no crasch.rar) is corrupted. Can you rearchive and reupload the archive?

[Hack01]

Hi,
Does anyone have 100% good solution?
Wery,wery thanks

[Ginocar]

Hi,
Doesn't work with my dump?

[tech_cz]

Hi,
could I have pass for "Lodgy no crash.rar".
Thanks in advance.

WBR, Marek

[Paullv]

Hi,
please sand pass for "Lodgy no crash.rar".

Thanks

[bysekoin]

rar pass please

[Ginocar]

Sorry boys but not give the pass for anybody because I got the rar pass for lots of people and three people used the thanks button.

[lorena]

please sand pass for Lodgy no crash.rar

[hafido1983]

any solution for this SPC560P50L3 processor any person can read and write this flash and clear the crash data...?
and any chinese tool can read this processor..?

[crashman]

Hello!

Send me please pass.
Thanks.

[AUTODIAGNOZA]

Please the pass for lodgy no crash. If you want i pay for it. I really need that. Thanks.

[WinWoj]

Hi guys. Some mate wrote, that SPC560P50L3 can do J-Link from Segger. In CPU list in JFlash software I found twoo, with (allow shadow) and without. It is matter? Or autodetect solve this problem? I don't know, couse I haven't jlink yet and I going to buy.
Regards

[aprilia40]

302899
this is pinout with xprog

[WinWoj]

from where can I downloa new version of xprog with this doc? My rev do not support MPC560xxx...

PS: Hack, are you solved your problem? If so - which way???

Regards
W.

[Hack01]

It is still broken .It vigrin dump

[WinWoj]

It is still broken .It vigrin dump

did you tried crash here: http://www.codecard.lt/MAC/upload.php?code=renault One mate give me that adress but I don't know is real.. My Sorento has still 5 dtc included crash, and can't run car.

[Ginocar]

Dear AUTODIAGNOZA,
I dont't need your money, only please use the Thanks button.
I sent the rar password everybody to wrote the PM and used this little button down in the left corner.

Dear WinWoj
I could to read/write only with MAC/SPC programmer (200USD). I tried Jlink but didn't work.
Here is the link: http://autokey.com.ua/MAC_MPC%20PROGRAMMER/HTML/mac_mpc.html

Only "data flash (64kb)" include the crash data in this SPC processor but there are the VIN and config too. So you must to write this section only. Unfortunately I don't know which lines include the crash data but I think near in the VIN.

[WinWoj]

Dear Ginocar,
I tried succesfully read/write SPC proccessor using j-ling, so in my opinion it works (see my j-link sandero thread). And I can't confirm yet (maybe today evening), but crash data probably has fixed location, and consist 32bytes. Soon few members will confirm this solution.
Regards

[Ginocar]

Dear Ginocar,
I tried succesfully read/write SPC proccessor using j-ling, so in my opinion it works (see my j-link sandero thread). And I can't confirm yet (maybe today evening), but crash data probably has fixed location, and consist 32bytes. Soon few members will confirm this solution.
Regards
Can you send me a j-link project file this SPC read/write?

[fatih55]

winrar pass pls

[WinWoj]

Can you send me a j-link project file this SPC read/write?

Gino, why are you so lazy :excitement: Grrr.. Your project file special for you friend:


304312

Just load this and follow according to the instructions my thread here:


http://www.digital-kaos.co.uk/forums/showthread.php/464193-J-Link-Dacia-Sandero-readout-how-to-save-flash-%28URGENT%29?p=2488341&viewfull=1#post2488341


Of course don't select option which is made by jflash file as I attach! only follow menu
'target' -> 'connect' -> 'Read back' etc. I hope You soldered good and everything will be OK.

Regards
W.

[Ginocar]

Gino, why are you so lazy :excitement: Grrr.. Your project file special for you friend:


304312

Just load this and follow according to the instructions my thread here:


http://www.digital-kaos.co.uk/forums/showthread.php/464193-J-Link-Dacia-Sandero-readout-how-to-save-flash-%28URGENT%29?p=2488341&viewfull=1#post2488341


Of course don't select option which is made by jflash file as I attach! only follow menu
'target' -> 'connect' -> 'Read back' etc. I hope You soldered good and everything will be OK.

Regards
W.

Dear WinWoj,
Thank you for your information.
If I would be lasy I did not upload the cleared data flash and
I did not share the dump and rar pass. Do you think about this?
Don't forget it I red this CPU since. Only I am interested in
why did not read success with j-link?
BR

[WinWoj]

Dear WinWoj,
Thank you for your information.
If I would be lasy I did not upload the cleared data flash and
I did not share the dump and rar pass. Do you think about this?
Don't forget it I red this CPU since. Only I am interested in
why did not read success with j-link?
BR

Yes, you right. I hope my instgruction would help. Anyway, my Dacia Sandero story is continued, not finished:
http://www.digital-kaos.co.uk/forums/showthread.php/464193-J-Link-Dacia-Sandero-readout-how-to-save-flash-(URGENT)?p=2493443&viewfull=1#post2493443
WBR
W.

[megane2]

please send password

[megane2]

please send pass

[bassam]

HIII

could i have the pass for Lodgy no crash.rar

please

[megane2]

please send passward

[visio]

Hi,
please sand pass for "Lodgy no crash.rar".

Thanks