PDA

View Full Version : peugeot 207 1.6 hdi ecu write risk with chinese clone MPPS v12



crackerx
6th March, 2014, 10:12 AM
Hello

i want to read/write flash memory to modify map on my girlfred peugeot 207 1.6 HDI
i think the ECU is BOSCH EDC16,Is there a risk to write failed and kill the ecu?

What do you recommend?

many thanks

madmcivor
6th March, 2014, 10:24 AM
There will always be a risk,
To minimise the risk make sure you have a good battery, maybe even put a battery trickle charger on to so that you dont go below 12v..

Make sure map you are putting on is correct for your car and checksums is good..

crackerx
6th March, 2014, 10:28 AM
for shure i will buy the tuned file,i-am not a tuner :(
i will make shure the laptop is full and car battery is full

if the write procedure will fail?what i will do?
this ecu have 29F400 flash that can be writed on programmer?

many thanks

ISIV
6th March, 2014, 10:31 AM
Dont worry if it fail the flash can be programed with a programmer....but in this case dont worry.....its your girlfriend car right??? ;)

crackerx
6th March, 2014, 10:41 AM
ok, many thanks

moky
6th March, 2014, 05:49 PM
i think 207 is in Can so mpps can't work,only Kline on edc16c34.....

ivan 323i
6th March, 2014, 06:30 PM
Mpps work on that car,i do a couple of 207 ,no problem...

Послато са GT-I9300 уз помоћ Тапатока

angelx431
6th March, 2014, 06:56 PM
ВНИМАНИЕ! edc16c34+ MPPS= CRASH