PDA

View Full Version : z16se EGR off



zevi36
7th March, 2014, 07:16 PM
Hi mates
I need egr off in this opel. Is an Opel Astra G 1.6 with Z16se engine. Could anyone help me? Thanks in advance

zevi36
14th March, 2014, 12:28 PM
nobody knows?

marusca
15th March, 2014, 01:44 PM
https://www.verboom.net/projects/speedster/20070729/index.html

zevi36
17th March, 2014, 09:12 AM
https://www.verboom.net/projects/speedster/20070729/index.html

What?s that?
I can?t open the link.

bobolin4o
17th March, 2014, 11:53 AM
What?s that?
I can?t open the link.
The link is ok.
It's for EGR simulator...
Cheers!

zevi36
17th March, 2014, 01:02 PM
The link is ok.
It's for EGR simulator...
Cheers!

ah, ok. but i have the problem inside the ECU, no in the EGR, so I need to make egr off or a new ECU. Thanks for the link.

marusca
17th March, 2014, 07:15 PM
Ok, then repair your ecu,not easy job...work with alusol for joints

bobolin4o
18th March, 2014, 12:50 PM
ah, ok. but i have the problem inside the ECU, no in the EGR, so I need to make egr off or a new ECU. Thanks for the link.
If you have problem inside of the ECU, soon will be a problem with another actuator or sensor etc.
Better repair the alu joints inside, or replace the ECU...
Regards!

zevi36
18th March, 2014, 01:06 PM
If you have problem inside of the ECU, soon will be a problem with another actuator or sensor etc.
Better repair the alu joints inside, or replace the ECU...
Regards!

thats true, because the first problem was in the trothle pedal, that haven?t 5v in one of his cables, and I feed with 5v, and 1 month later the problem is this.

zevi36
21st March, 2014, 08:56 AM
anyone knows how to clone this ecu with carprog?

bobolin4o
21st March, 2014, 09:26 AM
With CarProg you can read and reset the PIN code.
With OP-Com you can synchronise Immo and ECU.
With Global TIS you must flash the ECU with propper SW.
That's in short...

zevi36
21st March, 2014, 10:00 AM
With CarProg you can read and reset the PIN code.
With OP-Com you can synchronise Immo and ECU.
With Global TIS you must flash the ECU with propper SW.
That's in short...
thanks, I just synchronise and all is ok, the engine star and egr problem dissapear, but now the air conditioner don?t work and P1540 is in memory, with old one there is no problem with air conditioner. Maybe this ecu have this problem or could be a programation problem, What do you think?

zevi36
21st March, 2014, 10:59 AM
I copy the flash memory of the old ecu in the new one and now all problems are desappear, so the air conditioner problem was in the configuration of the new ecu.
Thanks a lot for every one who help me