How can i read EDC15M ecu ?

[laleen]

How can i read Opel Zafira 2000DTI 82HP EDC15M, i can only write, but not read..
I try with Flashtec, Magrpo2 and Fgtech

Is there any thing for read the ecu ? The ECU ID is 0281010021
I have a mod file 0281010021, can i flash that file ? Does the car starts ?

Thanks in advance

[overs0ull]

it's so easy open the ecu see that is the eeprom inside i chip like them over 20 and almost all of them are with chip 2 plcc32 chips . Have others whit 29f400 and they are easy to read .
Get the ecu out , open it - and see what is the eeprom inside and some skills you will get it on programmer .
Regards .

[Remi55]

EVC SPI does read and write the EDC15M ECU

[kennfeld]

EVC SPI does read and write the EDC15M ECU

spi evc use a 75 % file taken from the evc server it's a .oro
you need a evc account with an official evc spi tool or a winols licenc
but since one year that part of evc is deleted from the server now you must ask them the file

DTHXXXXX.oro the XXX depend of the info showed in the high of you tool identification

[proel]

you can write with fgtech without problems. be sure checksum is ok and right sw version.

[kennfeld]

you can write with fgtech without problems. be sure checksum is ok and right sw version.


you need to check the size required by you ecu
then
read the file id
dthxxxxx
and some other file info
for example
VT1M3050 the m is for manual gear box
Y20DTH D3

this is all in the file