NEED ADVICE HOW TO MAKE A SOIC 8 PINS UPA USB

[AMLGAR]

NEED SOME HELP how to built a SOIC 8 PINS CLIP , WITH UPA USB, need connections in eeprom thanks SOIC 8 PINS, I TRIED but i dont get good connection does not read DATA, THANSK
UPA USB PINS
1. unsed
2. CLK
3. DO
4.WP
5.VSS
6.DI
7.CS
8.HOLD
9.VCC

[kumistheru]

UPA Pins

1 5
----------
\0 0 0 0 0/
\0 0 0 0/
-------
6 9

10 Pin Soic8 Clip

1 10
-------
| 0 0 |
| 0 0 |
| 0 0 |
| 0 0 |
| 0 0 |
-------
5 6

P7 of UPA = 1 of the 10P SOIC8 Clip.
P2 of UPA = 2 of the 10P SOIC8 Clip.
P6 of UPA = 3 of the 10P SOIC8 Clip.
P3 of UPA = 4 of the 10P SOIC8 Clip.
P5 of UPA = 7 of the 10P SOIC8 Clip.
P4 of UPA = 8 of the 10P SOIC8 Clip.
P8 of UPA = 9 of the 10P SOIC8 Clip.
P9 of UPA = 10 of the 10P SOIC8 Clip.


Pins 5 & 6 in 10pin soic cable are unused.

Hope this helps for your requirement.

[XmoDDeR]

UPA Pins

1 5
----------
\0 0 0 0 0/
\0 0 0 0/
-------
6 9

10 Pin Soic8 Clip

1 10
-------
| 0 0 |
| 0 0 |
| 0 0 | < --------- IS NOT A SOIC8 ITS AN 10 PIN IDC CONNECTOR , SOIC 8 HAS 8 CONNECTIONS HENCE "SOIC 8"
| 0 0 |
| 0 0 |
-------
5 6

P7 of UPA = 1 of the 10P SOIC8 Clip.
P2 of UPA = 2 of the 10P SOIC8 Clip.
P6 of UPA = 3 of the 10P SOIC8 Clip.
P3 of UPA = 4 of the 10P SOIC8 Clip.
P5 of UPA = 7 of the 10P SOIC8 Clip.
P4 of UPA = 8 of the 10P SOIC8 Clip.
P8 of UPA = 9 of the 10P SOIC8 Clip.
P9 of UPA = 10 of the 10P SOIC8 Clip.


Pins 5 & 6 in 10pin soic cable are unused.

Hope this helps for your requirement.

that is an IDC plug SOIC8 has 8 connections not 10 hence "SOIC 8"

good luck cheers

[kumistheru]

If you buy pre-wired soic8 Clip, you will receive 10 pin IDC connector, which is the common. The information that I have given is for 10pin IDC connector for SOIC8 Clip. Therefore, nothing wrong with the connection information provided. If the clip came up with 8pin IDC connector, common sense to ignore last two pins as stated above.