View Full Version : peugeot 308 1.6HDI year 2006 reflash problem - tool
crackerx
10th March, 2014, 08:18 AM
hello
I try to read flash from peugeot 308 1.6HDI year 2006 with MPPS but error "ecu not found"
mpps v13 not have this peugeot 308 in list but i have try to select other models with this engne:
Peugeot 206 1.6 HDI Bosch EDC16C3 K-Line
Peugeot 206 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 207 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 306 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 307 1.6 HDI Bosch EDC16C3 K-Line
Peugeot 307 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 407 1.6 HDI Bosch EDC16C3 K-Line
Peugeot 407 1.6 HDI FAP Bosch EDC16C34 K-Line
"ecu not found"
what tool i need to read/write the flash file?
backsession
29th October, 2015, 10:46 PM
hello
I try to read flash from peugeot 308 1.6HDI year 2006 with MPPS but error "ecu not found"
mpps v13 not have this peugeot 308 in list but i have try to select other models with this engne:
Peugeot 206 1.6 HDI Bosch EDC16C3 K-Line
Peugeot 206 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 207 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 306 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 307 1.6 HDI Bosch EDC16C3 K-Line
Peugeot 307 1.6 HDI FAP Bosch EDC16C34 K-Line
Peugeot 407 1.6 HDI Bosch EDC16C3 K-Line
Peugeot 407 1.6 HDI FAP Bosch EDC16C34 K-Line
"ecu not found"
what tool i need to read/write the flash file?
How did you make it?
same problem
thanks in advance
Vasily.U
30th October, 2015, 08:13 AM
In some psa cars with EDC16 no wire DLC pin 7 to ECU pin b4 (black plug).
soundnavigator
30th October, 2015, 10:29 AM
In some new models you can't read by K line ( the car haven't this communication / kline wire ), then you need to read by CAN and from good tool with worked CAN.
backsession
30th October, 2015, 11:45 PM
thanks for reply.
What tool can i use via obd?
vasko
31st October, 2015, 07:22 PM
Use galleto
Sent from my iPhone using Tapatalk
backsession
1st November, 2015, 11:28 PM
with galleto i've the same problem.
I can select "bosch edc16+c34 flash m58bw016xb"
But still don't appear peugeot 308 1,6 hdi 90cv.
Can I read it anyway? without problems?
thanks
Vasily.U
3rd November, 2015, 06:39 AM
You need join ECU pin b4 (black plug) with pin 7 galleto )))
paulogapea
3rd November, 2015, 10:14 AM
mate read with bdm. its a safe way and after that you have a full read
backsession
3rd November, 2015, 07:08 PM
Thanks for replypaulogapea (http://www.digital-kaos.co.uk/forums/member.php/403596-paulogapea)..
can you tell me what the dangerous to read it via obd?
thanks
Vasily.U
4th November, 2015, 07:09 AM
I would not recommend to open EDC16C34 without needed.
Vasily.U
4th November, 2015, 11:59 AM
You need disconnect black plug EDC16c34 . Insert into plug pin b4 (from other used plug) , connect back plug to ECU. Bridge new wire to data link connector pin7 (or to pin 7 your tool).
MPPS too work fine with EDC16C34.
339601
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.