Ford Fiesta yr1994 - ECU 92AB-12A650-EB - Immo off possible?

[psam]

Hi,

I've been searching our forum for hours and hours trying to find a solution for this non starter Ford Fiesta yr1994 - ECU 92AB-12A650-EB. Regretabilly I found nothing... forgive me if I'm blind, but I couldn't find any relevant info on this ECU.
Is it possible immo off or make new keys? It's a non OBD2 compliant car.

Thanks for any possible help or advise.
BR,
PM.

249972

[psam]

Thinking of the car year, it probablly had a master key. Could it be possible to reprogram a new one?


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[faan]

Enduro motor? Think its an EECIV system? no im*o off possible... easy way to tell! if key put on,look at LED (next to clock) led should flash fast if immo problem. If not illuminating, means u got wiring problem or ECU F&*%d

[psam]

Enduro motor? Think its an EECIV system? no im*o off possible... easy way to tell! if key put on,look at LED (next to clock) led should flash fast if immo problem. If not illuminating, means u got wiring problem or ECU F&*%d

I think there's no led on the car... are you sure there's no immo off solution to this one?

[faan]

Need more info regarding vehicle m8...

[psam]

In fact the car has the immo light near the clock (flashing quicklly!) and it's a 1.3 petrol.
Thank you SO MUCH!

[psam]

Motor code FBJ ? Could it be?

[keygargoil]

this will have a seperate pats box either passenger footwell or behind the glove box

[psam]

this will have a seperate pats box either passenger footwell or behind the glove box

THANKS!
Do you think it will be possible to produce transponders from it?

[faan]

LED telling you there is a immo problem...is there a master key?(red) You can remove reader around ignition, read dump and code up new key...Report back brother

[petarcanev]

i have this problem allow with T300 erase old keys and program new master minimum tree keys program

[nonij61]

petarcanev, he said that the car does not have obd socket.
where will he socket the tcode.

[psam]

LED telling you there is a immo problem...is there a master key?(red) You can remove reader around ignition, read dump and code up new key...Report back brother

Today I received the immo box. I've read TMS370 and it seems there's no keys inside the dump. At least according to AVDI (original). I've produced 3 transponders: Key 0, Key 1 and Key 2. Could it be possible that AVDI made a Master Key? Key 0? And now it will be possible to program this Master Key and the new keys?
Or I must find a way to add keys to the dump?

Anyway I attach the dump.

Any help will be GREAT!

Thanks!

[psam]

If someone can add these key logic to the dump...
I attach some pictures.

Thank you so much!

[psam]

Can someone give me a hand on this one?
Thank you so much!

[faan]

Id love to help mate, but im still on the learning side of that...I know the is a way to "by-pass" immo on eec-iv, but i cant find it at this time.

[psam]

Thanks anyway.
If someone have an idea how to add transponder logic to immo box eprom.
Thanks!

[psam]

Any ideas, please!
Thanks.

[psam]

Please give me a hand on this.
Thanks.

[keygargoil]

this is a bad read the file does not look right atr all what have you read the file with re read the chip and posyt a pic of the immo board aswell

[psam]

this is a bad read the file does not look right atr all what have you read the file with re read the chip and posyt a pic of the immo board aswell

I've read MCU with xprog. AVDI recognized the file OK but no key programmed as expected...
So I think the reading it's correct.
Please find bellow the picture of the immo board.
Thanks.

[psam]

Could it be possible, if I do the trick of the ECU on the immo box, I mean, remove TMS370 from immo box and bridge pin 4 to pin 13. Someone knows if it will work?
The question here is that the car it's 150kms away from me...

[psam]

Ideas, please.
Thanks.

[keygargoil]

thats a old one for the diesel escorts to power the fuel pump

[psam]

Yes very old in fact...
But I'm really stucked on this one!

[psam]

Help, PLEASE!
Thanks!

[psam]

If someone has clone files from these ECUs...

[psam]

Any ideas, PLEASE!
Thanks!