FGTECH 2 CLONE V50 & EDC17C46

[elmassioui]

I CANT READ THIS ECU .I DID THIS CONNECTION BOOT MODE LIKE PCTURE without success. ANY HELP PLZ. THANK YOU

[icezero2010]

i think it has tp also use tprot 8

[elmassioui]

must connecte the grey wire(boot) from fgtech or no ?
thank you

[carmageddon]

I CANT READ THIS ECU .I DID THIS CONNECTION BOOT MODE LIKE PCTURE without success. ANY HELP PLZ. THANK YOU

fgtech v48-50-51-52 cant R-W this ecu...only v53...i did this without problem

[pulsar2000]

fgtech v48-50-51-52 cant R-W this ecu...only v53...i did this without problem
I couldn`t make this ECU with V48 Fgtech or K-tag (China)
yet to try with V54,,,,

[elmassioui]

ok.can i use v53 with my fgtech ?

[carmageddon]

fgtech v48 have hardware totally different from fgtech v53, you can not use software v53 with hardware v48

[J_amb_o]

You must have a death wish to play with this ECU using a clone.

[elmassioui]

how can i know whats the hardware version i have ?

[carmageddon]

the HW for v48-50-51-52 is always the same, exist only two HW, v48 and v53....you have v48!

[elmassioui]

ok.but now i can read data of ecu edc17c46 but when reading flash give erro may be i forget something :) (always with clone v50 )

[morgano]

Read ECU ID is one thing, bypass security and read/write flash is totally different.

[elmassioui]

i know that ,coz first time i cant read anything and now i confirm for v53 :)

[antvorskov2006]

I have FGTech v54 clone , I can not read ecu (VAG EDC17C46)
Is there some who have read this ecu successfully with FGTech v54 clone ?

problem solved

[motorsport]

Hi how you solved?

[nokwueze]

FGTECH 2 CLONE V50 & EDC17C46friends i have fgtech v50 the software is silent pls how do i resolve this problem

[vwphun]

fgtech v48-50-51-52 cant R-W this ecu...only v53...i did this without problem

I did it with v51 (v48) - R/W. Some clones does not R/W via CAN (bad fw in MCU?)

[diagprog]

FGTECH 2 CLONE V50 & EDC17C46

friends i have fgtech v50 the software is silent pls how do i resolve this problem

Some ECU EDC17 have zones otp(one time programmable) you can't do it by fg tech V50, magprog X17.