PDA

View Full Version : FGTECH 2 CLONE V50 & EDC17C46


elmassioui
13th March, 2014, 10:59 PM
I CANT READ THIS ECU .I DID THIS CONNECTION BOOT MODE LIKE PCTURE without success. ANY HELP PLZ. THANK YOU
icezero2010
14th March, 2014, 07:41 AM
i think it has tp also use tprot 8
elmassioui
14th March, 2014, 09:55 AM
must connecte the grey wire(boot) from fgtech or no ?
thank you
carmageddon
14th March, 2014, 10:34 AM
I CANT READ THIS ECU .I DID THIS CONNECTION BOOT MODE LIKE PCTURE without success. ANY HELP PLZ. THANK YOU

fgtech v48-50-51-52 cant R-W this ecu...only v53...i did this without problem
pulsar2000
14th March, 2014, 11:00 AM
fgtech v48-50-51-52 cant R-W this ecu...only v53...i did this without problem
I couldn`t make this ECU with V48 Fgtech or K-tag (China)
yet to try with V54,,,,
elmassioui
14th March, 2014, 08:56 PM
ok.can i use v53 with my fgtech ?
carmageddon
15th March, 2014, 10:01 AM
fgtech v48 have hardware totally different from fgtech v53, you can not use software v53 with hardware v48
J_amb_o
15th March, 2014, 09:56 PM
You must have a death wish to play with this ECU using a clone.
elmassioui
15th March, 2014, 11:30 PM
how can i know whats the hardware version i have ?
carmageddon
16th March, 2014, 08:01 AM
the HW for v48-50-51-52 is always the same, exist only two HW, v48 and v53....you have v48!
elmassioui
23rd March, 2014, 08:48 PM
ok.but now i can read data of ecu edc17c46 but when reading flash give erro may be i forget something :) (always with clone v50 )
morgano
23rd March, 2014, 09:03 PM
Read ECU ID is one thing, bypass security and read/write flash is totally different.
elmassioui
23rd March, 2014, 10:02 PM
i know that ,coz first time i cant read anything and now i confirm for v53 :)
antvorskov2006
25th April, 2014, 05:08 AM
I have FGTech v54 clone , I can not read ecu (VAG EDC17C46)
Is there some who have read this ecu successfully with FGTech v54 clone ?

problem solved
motorsport
25th April, 2014, 07:46 AM
Hi how you solved?
nokwueze
26th April, 2014, 03:00 AM
FGTECH 2 CLONE V50 & EDC17C46friends i have fgtech v50 the software is silent pls how do i resolve this problem
vwphun
4th August, 2014, 10:58 AM
fgtech v48-50-51-52 cant R-W this ecu...only v53...i did this without problem

I did it with v51 (v48) - R/W. Some clones does not R/W via CAN (bad fw in MCU?)
diagprog
4th August, 2014, 11:17 AM
FGTECH 2 CLONE V50 & EDC17C46

friends i have fgtech v50 the software is silent pls how do i resolve this problem

Some ECU EDC17 have zones otp(one time programmable) you can't do it by fg tech V50, magprog X17.