View Full Version : BMW
aslamaslam
17th March, 2014, 11:13 AM
HI
NEED TO SYNC
siemens dme ms42 index 04
7 500 255
vin:WBAAM11040JM87403
NOTE: NOT ANY TOOL TO ADAPATOIN
fear_dark
17th March, 2014, 11:32 AM
try this mate
aslamaslam
17th March, 2014, 12:04 PM
hi
the cat not crank
note:
the original ews lost
fear_dark
17th March, 2014, 12:09 PM
which is the key?
aslamaslam
17th March, 2014, 12:17 PM
the key is ok but the ews no original the last it is lost
i need sycr the old ecu and ews to stat this car
miny thankkssssss
replay me please
if not gave me immo off for this ecu
fear_dark
17th March, 2014, 12:23 PM
i make ecu renew but u need sync with gt1, avdi, etc..
aslamaslam
17th March, 2014, 12:29 PM
but i dont any tool Do lansh 431
Do you fit???
tqnata83
17th March, 2014, 02:29 PM
ISN ECU flash is 84 2D 2D 84 D2 7B
tell me EWS ID to add in ecu
my ews editor crash
ecufix
17th March, 2014, 02:35 PM
Please send pass
shanektm450
17th March, 2014, 04:26 PM
HERE IS DATA SYNC IN BOTH ECU AND EWS THIS WILL WORK JUST SYNC WITH AUTOBOSS CARMEN ECT.
CHEERS
SHANE
aslamaslam
17th March, 2014, 04:42 PM
thanks
i test and replay
smt
17th March, 2014, 04:46 PM
yes you can synch with launch
cjawahir
17th March, 2014, 10:34 PM
you said you change the ews , did you make new key with transponder chip?
then need to match coding data and password then sync .
cj
aslamaslam
18th March, 2014, 08:47 AM
hi
yes i make new key with transponder chip
aslamaslam
18th March, 2014, 08:57 AM
please
After attempts
I changed the number vin in ews Such as ecu
the car crank but not start no spark I tried to adapt from lansh but no
Results
please if yo can to sync ews +ecu 100%
the engine turns but will not start.
immo box to acknowledge the key good
cjawahir
18th March, 2014, 11:11 AM
hi write this to ews , but will need to sync with scan tool , Bram 380 can sync with out scan tool .
try let me know
cj
aslamaslam
18th March, 2014, 11:44 AM
thanks
test and replay
aslamaslam
18th March, 2014, 12:04 PM
te car no start because the car is bmw323i not 520i
read please
After attempts
I changed the number vin in ews Such as ecu
the car crank but not start no spark I tried to adapt from lansh but no
Results
please if yo can to sync ews +ecu 100%
the engine turns but will not start.
immo box to acknowledge the key good http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files
http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif ews crank no star.rar (http://www.digital-kaos.co.uk/forums/attachments/f178/250917d1395129166-bmw-ews-crank-no-star.rar) (465 Bytes, 1 views)
http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif FLASH dme ms42.rar (http://www.digital-kaos.co.uk/forums/attachments/f178/250918d1395129434-bmw-flash-dme-ms42.rar) (147.2 KB, 1 views)
the car crank but no spark
i neeed kit bmw325i
please
cjawahir
18th March, 2014, 12:08 PM
the both ecu need to match password , that s what i did wit h ews , did you try it .
also will need to sync
cj
aslamaslam
18th March, 2014, 12:14 PM
i can sync whith lansh or no???
bram380
18th March, 2014, 12:53 PM
try this dump:
aslamaslam
18th March, 2014, 12:59 PM
testr and replay
1000000thankss
aslamaslam
18th March, 2014, 03:40 PM
hi
the car crank but no star no spark
thanksss
bram380
18th March, 2014, 05:58 PM
try again with this dump. (http://www.digital-kaos.co.uk/forums/attachments/f178/251014d1395161727-bmw-wbaam11040jm87403_ecu_ms42_5wk9037_2014-03-19.rar)
aslamaslam
19th March, 2014, 07:42 PM
thanks
the car star ok
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.