PDA

View Full Version : need add new key 4C yaris



peko
18th March, 2014, 02:59 PM
Hi friends

toyota yaris 03 with bosch ecm 0261208036 toyota 89661-0d210. Can you help me and add key into the immo dump. I have read 95080 in ecm and have new key logic
but no way start, can you check my files maybe have wrong anything ...

key data :
http://s14.postimg.org/ctz2vbkf1/TIRIS_4_C_TEXASTPX1.jpg (http://postimg.org/image/ctz2vbkf1/)

ori file : 250402

mod1 file : 250403

mod2 file : 250404


thanks ;)

autoTkey
18th March, 2014, 03:10 PM
I think transponder must be prepared first according to the immo dump and then the transponder gets stored in the immo dump.

peko
18th March, 2014, 03:41 PM
i read my transpondeur
and post data from immo

gokey
19th March, 2014, 08:05 AM
for what device read 4c ?

peko
19th March, 2014, 09:29 AM
is about toyota yaris 2003 with bosch ecu 0261208036 toyota 89661-0d210

djoko.k
6th July, 2016, 03:32 PM
Is there a virgin for this ecu?

ucokseparoh
7th July, 2016, 12:16 AM
how did you read the dump? can't open the data with my programmer. Isn't it supposed to be in .bin file? yours,after downloaded,is not in .bin file. Don't know,may be i miss something,but so far i always managed to read every dumps from here.

dtip
7th July, 2016, 12:22 AM
how did you read the dump? can't open the data with my programmer. Isn't it supposed to be in .bin file? yours,after downloaded,is not in .bin file. Don't know,may be i miss something,but so far i always managed to read every dumps from here.

You can always change extension of file mate. Extension is not problem if it is a good read

ucokseparoh
7th July, 2016, 12:25 AM
You can always change extension of file mate. Extension is not problem if it is a good read

Okay mate..thanks for the tips. Will try to change it.

lion0304
7th July, 2016, 08:19 AM
Hi friends

toyota yaris 03 with bosch ecm 0261208036 toyota 89661-0d210. Can you help me and add key into the immo dump. I have read 95080 in ecm and have new key logic
but no way start, can you check my files maybe have wrong anything ...

key data :
http://s14.postimg.org/ctz2vbkf1/TIRIS_4_C_TEXASTPX1.jpg (http://postimg.org/image/ctz2vbkf1/)

ori file : 250402

mod1 file : 250403

mod2 file : 250404


thanks ;)



Yaris with Eeprom 95080, you can use Effi V2.7.2 173 modules for adding key.

Read as 16 bits!!!

385390

ucokseparoh
7th July, 2016, 08:54 AM
How did it go mate?

I tried comparing 2 dumps of Yaris,same year,but the other one eeprom is 95P08. Loaded them both to Tango,write 4C key,and got the "return files". After,i closely watched any different on both and found that only in your dump a slightly change occured. My conclusion is in the attachment below mate.. check pictures (they are 2 folders in it where each of them contains 2 different solutions generated after swap bytes) 385393

try and report. :)

G'luck.

Best regards..

djoko.k
9th July, 2016, 03:08 PM
Still looking for virgin

fey3235
13th July, 2023, 12:32 PM
same here I'm looking for virgin too